comedi/comedi/drivers/ni_stc.h File Reference

#include "ni_tio.h"

Go to the source code of this file.

Classes
struct	ni_board_struct
Defines
#define	_bit15   0x8000
#define	_bit14   0x4000
#define	_bit13   0x2000
#define	_bit12   0x1000
#define	_bit11   0x0800
#define	_bit10   0x0400
#define	_bit9   0x0200
#define	_bit8   0x0100
#define	_bit7   0x0080
#define	_bit6   0x0040
#define	_bit5   0x0020
#define	_bit4   0x0010
#define	_bit3   0x0008
#define	_bit2   0x0004
#define	_bit1   0x0002
#define	_bit0   0x0001
#define	NUM_PFI_OUTPUT_SELECT_REGS   6
#define	Interrupt_A_Ack_Register   2
#define	G0_Gate_Interrupt_Ack   _bit15
#define	G0_TC_Interrupt_Ack   _bit14
#define	AI_Error_Interrupt_Ack   _bit13
#define	AI_STOP_Interrupt_Ack   _bit12
#define	AI_START_Interrupt_Ack   _bit11
#define	AI_START2_Interrupt_Ack   _bit10
#define	AI_START1_Interrupt_Ack   _bit9
#define	AI_SC_TC_Interrupt_Ack   _bit8
#define	AI_SC_TC_Error_Confirm   _bit7
#define	G0_TC_Error_Confirm   _bit6
#define	G0_Gate_Error_Confirm   _bit5
#define	AI_Status_1_Register   2
#define	Interrupt_A_St   0x8000
#define	AI_FIFO_Full_St   0x4000
#define	AI_FIFO_Half_Full_St   0x2000
#define	AI_FIFO_Empty_St   0x1000
#define	AI_Overrun_St   0x0800
#define	AI_Overflow_St   0x0400
#define	AI_SC_TC_Error_St   0x0200
#define	AI_START2_St   0x0100
#define	AI_START1_St   0x0080
#define	AI_SC_TC_St   0x0040
#define	AI_START_St   0x0020
#define	AI_STOP_St   0x0010
#define	G0_TC_St   0x0008
#define	G0_Gate_Interrupt_St   0x0004
#define	AI_FIFO_Request_St   0x0002
#define	Pass_Thru_0_Interrupt_St   0x0001
#define	AI_Status_2_Register   5
#define	Interrupt_B_Ack_Register   3
#define	AO_Status_1_Register   3
#define	Interrupt_B_St   _bit15
#define	AO_FIFO_Full_St   _bit14
#define	AO_FIFO_Half_Full_St   _bit13
#define	AO_FIFO_Empty_St   _bit12
#define	AO_BC_TC_Error_St   _bit11
#define	AO_START_St   _bit10
#define	AO_Overrun_St   _bit9
#define	AO_START1_St   _bit8
#define	AO_BC_TC_St   _bit7
#define	AO_UC_TC_St   _bit6
#define	AO_UPDATE_St   _bit5
#define	AO_UI2_TC_St   _bit4
#define	G1_TC_St   _bit3
#define	G1_Gate_Interrupt_St   _bit2
#define	AO_FIFO_Request_St   _bit1
#define	Pass_Thru_1_Interrupt_St   _bit0
#define	AI_Command_2_Register   4
#define	AI_End_On_SC_TC   _bit15
#define	AI_End_On_End_Of_Scan   _bit14
#define	AI_START1_Disable   _bit11
#define	AI_SC_Save_Trace   _bit10
#define	AI_SI_Switch_Load_On_SC_TC   _bit9
#define	AI_SI_Switch_Load_On_STOP   _bit8
#define	AI_SI_Switch_Load_On_TC   _bit7
#define	AI_SC_Switch_Load_On_TC   _bit4
#define	AI_STOP_Pulse   _bit3
#define	AI_START_Pulse   _bit2
#define	AI_START2_Pulse   _bit1
#define	AI_START1_Pulse   _bit0
#define	AO_Command_2_Register   5
#define	AO_End_On_BC_TC(x)   (((x) & 0x3) << 14)
#define	AO_Start_Stop_Gate_Enable   _bit13
#define	AO_UC_Save_Trace   _bit12
#define	AO_BC_Gate_Enable   _bit11
#define	AO_BC_Save_Trace   _bit10
#define	AO_UI_Switch_Load_On_BC_TC   _bit9
#define	AO_UI_Switch_Load_On_Stop   _bit8
#define	AO_UI_Switch_Load_On_TC   _bit7
#define	AO_UC_Switch_Load_On_BC_TC   _bit6
#define	AO_UC_Switch_Load_On_TC   _bit5
#define	AO_BC_Switch_Load_On_TC   _bit4
#define	AO_Mute_B   _bit3
#define	AO_Mute_A   _bit2
#define	AO_UPDATE2_Pulse   _bit1
#define	AO_START1_Pulse   _bit0
#define	AO_Status_2_Register   6
#define	DIO_Parallel_Input_Register   7
#define	AI_Command_1_Register   8
#define	AI_Analog_Trigger_Reset   _bit14
#define	AI_Disarm   _bit13
#define	AI_SI2_Arm   _bit12
#define	AI_SI2_Load   _bit11
#define	AI_SI_Arm   _bit10
#define	AI_SI_Load   _bit9
#define	AI_DIV_Arm   _bit8
#define	AI_DIV_Load   _bit7
#define	AI_SC_Arm   _bit6
#define	AI_SC_Load   _bit5
#define	AI_SCAN_IN_PROG_Pulse   _bit4
#define	AI_EXTMUX_CLK_Pulse   _bit3
#define	AI_LOCALMUX_CLK_Pulse   _bit2
#define	AI_SC_TC_Pulse   _bit1
#define	AI_CONVERT_Pulse   _bit0
#define	AO_Command_1_Register   9
#define	AO_Analog_Trigger_Reset   _bit15
#define	AO_START_Pulse   _bit14
#define	AO_Disarm   _bit13
#define	AO_UI2_Arm_Disarm   _bit12
#define	AO_UI2_Load   _bit11
#define	AO_UI_Arm   _bit10
#define	AO_UI_Load   _bit9
#define	AO_UC_Arm   _bit8
#define	AO_UC_Load   _bit7
#define	AO_BC_Arm   _bit6
#define	AO_BC_Load   _bit5
#define	AO_DAC1_Update_Mode   _bit4
#define	AO_LDAC1_Source_Select   _bit3
#define	AO_DAC0_Update_Mode   _bit2
#define	AO_LDAC0_Source_Select   _bit1
#define	AO_UPDATE_Pulse   _bit0
#define	DIO_Output_Register   10
#define	DIO_Parallel_Data_Out(a)   ((a)&0xff)
#define	DIO_Parallel_Data_Mask   0xff
#define	DIO_SDOUT   _bit0
#define	DIO_SDIN   _bit4
#define	DIO_Serial_Data_Out(a)   (((a)&0xff)<<8)
#define	DIO_Serial_Data_Mask   0xff00
#define	DIO_Control_Register   11
#define	DIO_Software_Serial_Control   _bit11
#define	DIO_HW_Serial_Timebase   _bit10
#define	DIO_HW_Serial_Enable   _bit9
#define	DIO_HW_Serial_Start   _bit8
#define	DIO_Pins_Dir(a)   ((a)&0xff)
#define	DIO_Pins_Dir_Mask   0xff
#define	AI_Mode_1_Register   12
#define	AI_CONVERT_Source_Select(a)   (((a) & 0x1f) << 11)
#define	AI_SI_Source_select(a)   (((a) & 0x1f) << 6)
#define	AI_CONVERT_Source_Polarity   _bit5
#define	AI_SI_Source_Polarity   _bit4
#define	AI_Start_Stop   _bit3
#define	AI_Mode_1_Reserved   _bit2
#define	AI_Continuous   _bit1
#define	AI_Trigger_Once   _bit0
#define	AI_Mode_2_Register   13
#define	AI_SC_Gate_Enable   _bit15
#define	AI_Start_Stop_Gate_Enable   _bit14
#define	AI_Pre_Trigger   _bit13
#define	AI_External_MUX_Present   _bit12
#define	AI_SI2_Initial_Load_Source   _bit9
#define	AI_SI2_Reload_Mode   _bit8
#define	AI_SI_Initial_Load_Source   _bit7
#define	AI_SI_Reload_Mode(a)   (((a) & 0x7)<<4)
#define	AI_SI_Write_Switch   _bit3
#define	AI_SC_Initial_Load_Source   _bit2
#define	AI_SC_Reload_Mode   _bit1
#define	AI_SC_Write_Switch   _bit0
#define	AI_SI_Load_A_Registers   14
#define	AI_SI_Load_B_Registers   16
#define	AI_SC_Load_A_Registers   18
#define	AI_SC_Load_B_Registers   20
#define	AI_SI_Save_Registers   64
#define	AI_SC_Save_Registers   66
#define	AI_SI2_Load_A_Register   23
#define	AI_SI2_Load_B_Register   25
#define	Joint_Status_1_Register   27
#define	DIO_Serial_IO_In_Progress_St   _bit12
#define	DIO_Serial_Input_Register   28
#define	Joint_Status_2_Register   29
#define	AO_Mode_1_Register   38
#define	AO_UPDATE_Source_Select(x)   (((x)&0x1f)<<11)
#define	AO_UI_Source_Select(x)   (((x)&0x1f)<<6)
#define	AO_Multiple_Channels   _bit5
#define	AO_UPDATE_Source_Polarity   _bit4
#define	AO_UI_Source_Polarity   _bit3
#define	AO_UC_Switch_Load_Every_TC   _bit2
#define	AO_Continuous   _bit1
#define	AO_Trigger_Once   _bit0
#define	AO_Mode_2_Register   39
#define	AO_FIFO_Mode_Mask   ( 0x3 << 14 )
#define	AO_FIFO_Retransmit_Enable   _bit13
#define	AO_START1_Disable   _bit12
#define	AO_UC_Initial_Load_Source   _bit11
#define	AO_UC_Write_Switch   _bit10
#define	AO_UI2_Initial_Load_Source   _bit9
#define	AO_UI2_Reload_Mode   _bit8
#define	AO_UI_Initial_Load_Source   _bit7
#define	AO_UI_Reload_Mode(x)   (((x) & 0x7) << 4)
#define	AO_UI_Write_Switch   _bit3
#define	AO_BC_Initial_Load_Source   _bit2
#define	AO_BC_Reload_Mode   _bit1
#define	AO_BC_Write_Switch   _bit0
#define	AO_UI_Load_A_Register   40
#define	AO_UI_Load_A_Register_High   40
#define	AO_UI_Load_A_Register_Low   41
#define	AO_UI_Load_B_Register   42
#define	AO_UI_Save_Registers   16
#define	AO_BC_Load_A_Register   44
#define	AO_BC_Load_A_Register_High   44
#define	AO_BC_Load_A_Register_Low   45
#define	AO_BC_Load_B_Register   46
#define	AO_BC_Load_B_Register_High   46
#define	AO_BC_Load_B_Register_Low   47
#define	AO_BC_Save_Registers   18
#define	AO_UC_Load_A_Register   48
#define	AO_UC_Load_A_Register_High   48
#define	AO_UC_Load_A_Register_Low   49
#define	AO_UC_Load_B_Register   50
#define	AO_UC_Save_Registers   20
#define	Clock_and_FOUT_Register   56
#define	IO_Bidirection_Pin_Register   57
#define	RTSI_Trig_Direction_Register   58
#define	Interrupt_Control_Register   59
#define	Interrupt_B_Enable   _bit15
#define	Interrupt_B_Output_Select(x)   ((x)<<12)
#define	Interrupt_A_Enable   _bit11
#define	Interrupt_A_Output_Select(x)   ((x)<<8)
#define	Pass_Thru_0_Interrupt_Polarity   _bit3
#define	Pass_Thru_1_Interrupt_Polarity   _bit2
#define	Interrupt_Output_On_3_Pins   _bit1
#define	Interrupt_Output_Polarity   _bit0
#define	AI_Output_Control_Register   60
#define	AI_START_Output_Select   _bit10
#define	AI_SCAN_IN_PROG_Output_Select(x)   (((x) & 0x3) << 8)
#define	AI_EXTMUX_CLK_Output_Select(x)   (((x) & 0x3) << 6)
#define	AI_LOCALMUX_CLK_Output_Select(x)   ((x)<<4)
#define	AI_SC_TC_Output_Select(x)   ((x)<<2)
#define	AI_START_STOP_Select_Register   62
#define	AI_START_Polarity   _bit15
#define	AI_STOP_Polarity   _bit14
#define	AI_STOP_Sync   _bit13
#define	AI_STOP_Edge   _bit12
#define	AI_STOP_Select(a)   (((a) & 0x1f)<<7)
#define	AI_START_Sync   _bit6
#define	AI_START_Edge   _bit5
#define	AI_START_Select(a)   ((a) & 0x1f)
#define	AI_Trigger_Select_Register   63
#define	AI_START1_Polarity   _bit15
#define	AI_START2_Polarity   _bit14
#define	AI_START2_Sync   _bit13
#define	AI_START2_Edge   _bit12
#define	AI_START2_Select(a)   (((a) & 0x1f) << 7)
#define	AI_START1_Sync   _bit6
#define	AI_START1_Edge   _bit5
#define	AI_START1_Select(a)   ((a) & 0x1f)
#define	AI_DIV_Load_A_Register   64
#define	AO_Start_Select_Register   66
#define	AO_UI2_Software_Gate   _bit15
#define	AO_UI2_External_Gate_Polarity   _bit14
#define	AO_START_Polarity   _bit13
#define	AO_AOFREQ_Enable   _bit12
#define	AO_UI2_External_Gate_Select(a)   (((a) & 0x1f) << 7)
#define	AO_START_Sync   _bit6
#define	AO_START_Edge   _bit5
#define	AO_START_Select(a)   ((a) & 0x1f)
#define	AO_Trigger_Select_Register   67
#define	AO_UI2_External_Gate_Enable   _bit15
#define	AO_Delayed_START1   _bit14
#define	AO_START1_Polarity   _bit13
#define	AO_UI2_Source_Polarity   _bit12
#define	AO_UI2_Source_Select(x)   (((x)&0x1f)<<7)
#define	AO_START1_Sync   _bit6
#define	AO_START1_Edge   _bit5
#define	AO_START1_Select(x)   (((x)&0x1f)<<0)
#define	AO_Mode_3_Register   70
#define	AO_UI2_Switch_Load_Next_TC   _bit13
#define	AO_UC_Switch_Load_Every_BC_TC   _bit12
#define	AO_Trigger_Length   _bit11
#define	AO_Stop_On_Overrun_Error   _bit5
#define	AO_Stop_On_BC_TC_Trigger_Error   _bit4
#define	AO_Stop_On_BC_TC_Error   _bit3
#define	AO_Not_An_UPDATE   _bit2
#define	AO_Software_Gate   _bit1
#define	AO_Last_Gate_Disable   _bit0
#define	Joint_Reset_Register   72
#define	Software_Reset   _bit11
#define	AO_Configuration_End   _bit9
#define	AI_Configuration_End   _bit8
#define	AO_Configuration_Start   _bit5
#define	AI_Configuration_Start   _bit4
#define	G1_Reset   _bit3
#define	G0_Reset   _bit2
#define	AO_Reset   _bit1
#define	AI_Reset   _bit0
#define	Interrupt_A_Enable_Register   73
#define	Pass_Thru_0_Interrupt_Enable   _bit9
#define	G0_Gate_Interrupt_Enable   _bit8
#define	AI_FIFO_Interrupt_Enable   _bit7
#define	G0_TC_Interrupt_Enable   _bit6
#define	AI_Error_Interrupt_Enable   _bit5
#define	AI_STOP_Interrupt_Enable   _bit4
#define	AI_START_Interrupt_Enable   _bit3
#define	AI_START2_Interrupt_Enable   _bit2
#define	AI_START1_Interrupt_Enable   _bit1
#define	AI_SC_TC_Interrupt_Enable   _bit0
#define	Interrupt_B_Enable_Register   75
#define	Pass_Thru_1_Interrupt_Enable   _bit11
#define	G1_Gate_Interrupt_Enable   _bit10
#define	G1_TC_Interrupt_Enable   _bit9
#define	AO_FIFO_Interrupt_Enable   _bit8
#define	AO_UI2_TC_Interrupt_Enable   _bit7
#define	AO_UC_TC_Interrupt_Enable   _bit6
#define	AO_Error_Interrupt_Enable   _bit5
#define	AO_STOP_Interrupt_Enable   _bit4
#define	AO_START_Interrupt_Enable   _bit3
#define	AO_UPDATE_Interrupt_Enable   _bit2
#define	AO_START1_Interrupt_Enable   _bit1
#define	AO_BC_TC_Interrupt_Enable   _bit0
#define	Second_IRQ_A_Enable_Register   74
#define	Second_IRQ_B_Enable_Register   76
#define	AI_Personal_Register   77
#define	AI_SHIFTIN_Pulse_Width   _bit15
#define	AI_EOC_Polarity   _bit14
#define	AI_SOC_Polarity   _bit13
#define	AI_SHIFTIN_Polarity   _bit12
#define	AI_CONVERT_Pulse_Timebase   _bit11
#define	AI_CONVERT_Pulse_Width   _bit10
#define	AI_CONVERT_Original_Pulse   _bit9
#define	AI_FIFO_Flags_Polarity   _bit8
#define	AI_Overrun_Mode   _bit7
#define	AI_EXTMUX_CLK_Pulse_Width   _bit6
#define	AI_LOCALMUX_CLK_Pulse_Width   _bit5
#define	AI_AIFREQ_Polarity   _bit4
#define	AO_Personal_Register   78
#define	RTSI_Trig_A_Output_Register   79
#define	RTSI_Trig_B_Output_Register   80
#define	RTSI_Board_Register   81
#define	Write_Strobe_0_Register   82
#define	Write_Strobe_1_Register   83
#define	Write_Strobe_2_Register   84
#define	Write_Strobe_3_Register   85
#define	AO_Output_Control_Register   86
#define	AO_External_Gate_Enable   _bit15
#define	AO_External_Gate_Select(x)   (((x)&0x1f)<<10)
#define	AO_Number_Of_Channels(x)   (((x)&0xf)<<6)
#define	AO_UPDATE2_Output_Select(x)   (((x)&0x3)<<4)
#define	AO_External_Gate_Polarity   _bit3
#define	AO_UPDATE2_Output_Toggle   _bit2
#define	AI_Mode_3_Register   87
#define	AI_Trigger_Length   _bit15
#define	AI_Delay_START   _bit14
#define	AI_Software_Gate   _bit13
#define	AI_SI_Special_Trigger_Delay   _bit12
#define	AI_SI2_Source_Select   _bit11
#define	AI_Delayed_START2   _bit10
#define	AI_Delayed_START1   _bit9
#define	AI_External_Gate_Mode   _bit8
#define	AI_FIFO_Mode_HF_to_E   (3<<6)
#define	AI_FIFO_Mode_F   (2<<6)
#define	AI_FIFO_Mode_HF   (1<<6)
#define	AI_FIFO_Mode_NE   (0<<6)
#define	AI_External_Gate_Polarity   _bit5
#define	AI_External_Gate_Select(a)   ((a) & 0x1f)
#define	G_Autoincrement_Register(a)   (68+(a))
#define	G_Command_Register(a)   (6+(a))
#define	G_HW_Save_Register(a)   (8+(a)*2)
#define	G_HW_Save_Register_High(a)   (8+(a)*2)
#define	G_HW_Save_Register_Low(a)   (9+(a)*2)
#define	G_Input_Select_Register(a)   (36+(a))
#define	G_Load_A_Register(a)   (28+(a)*4)
#define	G_Load_A_Register_High(a)   (28+(a)*4)
#define	G_Load_A_Register_Low(a)   (29+(a)*4)
#define	G_Load_B_Register(a)   (30+(a)*4)
#define	G_Load_B_Register_High(a)   (30+(a)*4)
#define	G_Load_B_Register_Low(a)   (31+(a)*4)
#define	G_Mode_Register(a)   (26+(a))
#define	G_Save_Register(a)   (12+(a)*2)
#define	G_Save_Register_High(a)   (12+(a)*2)
#define	G_Save_Register_Low(a)   (13+(a)*2)
#define	G_Status_Register   4
#define	Analog_Trigger_Etc_Register   61
#define	G_Disarm_Copy   _bit15
#define	G_Save_Trace_Copy   _bit14
#define	G_Arm_Copy   _bit13
#define	G_Bank_Switch_Start   _bit10
#define	G_Little_Big_Endian   _bit9
#define	G_Synchronized_Gate   _bit8
#define	G_Write_Switch   _bit7
#define	G_Up_Down(a)   (((a)&0x03)<<5)
#define	G_Disarm   _bit4
#define	G_Analog_Trigger_Reset   _bit3
#define	G_Save_Trace   _bit1
#define	G_Arm   _bit0
#define	G_Bank_Switch_Enable   _bit12
#define	G_Bank_Switch_Mode   _bit11
#define	G_Load   _bit2
#define	G_Gate_Select(a)   (((a)&0x1f)<<7)
#define	G_Source_Select(a)   (((a)&0x1f)<<2)
#define	G_Write_Acknowledges_Irq   _bit1
#define	G_Read_Acknowledges_Irq   _bit0
#define	G_Source_Polarity   _bit15
#define	G_Output_Polarity   _bit14
#define	G_OR_Gate   _bit13
#define	G_Gate_Select_Load_Source   _bit12
#define	G_Loading_On_TC   _bit12
#define	G_Output_Mode(a)   (((a)&0x03)<<8)
#define	G_Trigger_Mode_For_Edge_Gate(a)   (((a)&0x03)<<3)
#define	G_Gating_Mode(a)   (((a)&0x03)<<0)
#define	G_Load_Source_Select   _bit7
#define	G_Reload_Source_Switching   _bit15
#define	G_Loading_On_Gate   _bit14
#define	G_Gate_Polarity   _bit13
#define	G_Counting_Once(a)   (((a)&0x03)<<10)
#define	G_Stop_Mode(a)   (((a)&0x03)<<5)
#define	G_Gate_On_Both_Edges   _bit2
#define	G1_Gate_Error_St   _bit15
#define	G0_Gate_Error_St   _bit14
#define	G1_TC_Error_St   _bit13
#define	G0_TC_Error_St   _bit12
#define	G1_No_Load_Between_Gates_St   _bit11
#define	G0_No_Load_Between_Gates_St   _bit10
#define	G1_Armed_St   _bit9
#define	G0_Armed_St   _bit8
#define	G1_Stale_Data_St   _bit7
#define	G0_Stale_Data_St   _bit6
#define	G1_Next_Load_Source_St   _bit5
#define	G0_Next_Load_Source_St   _bit4
#define	G1_Counting_St   _bit3
#define	G0_Counting_St   _bit2
#define	G1_Save_St   _bit1
#define	G0_Save_St   _bit0
#define	G_Autoincrement(a)   ((a)<<0)
#define	Analog_Trigger_Mode(x)   ((x) & 0x7)
#define	Analog_Trigger_Enable   _bit3
#define	Analog_Trigger_Drive   _bit4
#define	GPFO_1_Output_Select   _bit7
#define	GPFO_0_Output_Select(a)   ((a)<<11)
#define	GPFO_0_Output_Enable   _bit14
#define	GPFO_1_Output_Enable   _bit15
#define	Window_Address   0x00
#define	Window_Data   0x02
#define	Configuration_Memory_Clear   82
#define	ADC_FIFO_Clear   83
#define	DAC_FIFO_Clear   84
#define	XXX_Status   0x01
#define	Serial_Command   0x0d
#define	Misc_Command   0x0f
#define	Port_A   0x19
#define	Port_B   0x1b
#define	Port_C   0x1d
#define	Configuration   0x1f
#define	Strobes   0x01
#define	Channel_A_Mode   0x03
#define	Channel_B_Mode   0x05
#define	Channel_C_Mode   0x07
#define	AI_AO_Select   0x09
#define	G0_G1_Select   0x0b
#define	Configuration_Memory_Low   0x10
#define	Configuration_Memory_High   0x12
#define	ADC_FIFO_Data_Register   0x1c
#define	AO_Configuration   0x16
#define	AO_Bipolar   _bit0
#define	AO_Deglitch   _bit1
#define	AO_Ext_Ref   _bit2
#define	AO_Ground_Ref   _bit3
#define	AO_Channel(x)   ((x) << 8)
#define	DAC_FIFO_Data   0x1e
#define	DAC0_Direct_Data   0x18
#define	DAC1_Direct_Data   0x1a
#define	Magic_611x   0x19
#define	Calibration_Channel_Select_611x   0x1a
#define	ADC_FIFO_Data_611x   0x1c
#define	AI_FIFO_Offset_Load_611x   0x05
#define	DAC_FIFO_Data_611x   0x14
#define	Cal_Gain_Select_611x   0x05
#define	AO_Window_Address_611x   0x18
#define	AO_Window_Data_611x   0x1e
#define	Magic_6143   0x19
#define	G0G1_DMA_Select_6143   0x0B
#define	PipelineDelay_6143   0x1f
#define	EOC_Set_6143   0x1D
#define	AIDMA_Select_6143   0x09
#define	AIFIFO_Data_6143   0x8C
#define	AIFIFO_Flag_6143   0x84
#define	AIFIFO_Control_6143   0x88
#define	AIFIFO_Status_6143   0x88
#define	AIFIFO_DMAThreshold_6143   0x90
#define	AIFIFO_Words_Available_6143   0x94
#define	Calibration_Channel_6143   0x42
#define	Calibration_LowTime_6143   0x20
#define	Calibration_HighTime_6143   0x22
#define	Relay_Counter_Load_Val__6143   0x4C
#define	Signature_6143   0x50
#define	Release_Date_6143   0x54
#define	Release_Oldest_Date_6143   0x58
#define	Calibration_Channel_6143_RelayOn   0x8000
#define	Calibration_Channel_6143_RelayOff   0x4000
#define	Calibration_Channel_Gnd_Gnd   0x00
#define	Calibration_Channel_2v5_Gnd   0x02
#define	Calibration_Channel_Pwm_Gnd   0x05
#define	Calibration_Channel_2v5_Pwm   0x0a
#define	Calibration_Channel_Pwm_Pwm   0x0d
#define	Calibration_Channel_Gnd_Pwm   0x0e
#define	SerDacLd(x)   (0x08<<(x))
#define	M_SERIES_EEPROM_SIZE   1024
#define	n_ni_boards   (sizeof(ni_boards)/sizeof(ni_board))
#define	boardtype   (*(ni_board *)dev->board_ptr)
#define	MAX_N_AO_CHAN   8
#define	NUM_GPCT   2
#define	NI_PRIVATE_COMMON
Typedefs
typedef struct ni_board_struct	ni_board
Enumerations
enum	Interrupt_B_Ack_Bits {   G1_Gate_Error_Confirm = _bit1, G1_TC_Error_Confirm = _bit2, AO_BC_TC_Trigger_Error_Confirm = _bit3, AO_BC_TC_Error_Confirm = _bit4,   AO_UI2_TC_Error_Confrim = _bit5, AO_UI2_TC_Interrupt_Ack = _bit6, AO_UC_TC_Interrupt_Ack = _bit7, AO_BC_TC_Interrupt_Ack = _bit8,   AO_START1_Interrupt_Ack = _bit9, AO_UPDATE_Interrupt_Ack = _bit10, AO_START_Interrupt_Ack = _bit11, AO_STOP_Interrupt_Ack = _bit12,   AO_Error_Interrupt_Ack = _bit13, G1_TC_Interrupt_Ack = _bit14, G1_Gate_Interrupt_Ack = _bit15 }
enum	Joint_Status_2_Bits { AO_TMRDACWRs_In_Progress_St = 0x20 }
enum	AO_FIFO_Mode_Bits { AO_FIFO_Mode_HF_to_F = (3 << 14), AO_FIFO_Mode_F = (2 << 14), AO_FIFO_Mode_HF = (1 << 14), AO_FIFO_Mode_E = (0 << 14) }
enum	Clock_and_FOUT_bits {   FOUT_Enable = _bit15, FOUT_Timebase_Select = _bit14, DIO_Serial_Out_Divide_By_2 = _bit13, Slow_Internal_Time_Divide_By_2 = _bit12,   Slow_Internal_Timebase = _bit11, G_Source_Divide_By_2 = _bit10, Clock_To_Board_Divide_By_2 = _bit9, Clock_To_Board = _bit8,   AI_Output_Divide_By_2 = _bit7, AI_Source_Divide_By_2 = _bit6, AO_Output_Divide_By_2 = _bit5, AO_Source_Divide_By_2 = _bit4,   FOUT_Divider_mask = 0xf }
enum	RTSI_Trig_Direction_Bits { Drive_RTSI_Clock_Bit = 0x1, Use_RTSI_Clock_Bit = 0x2 }
enum	ai_convert_output_selection { AI_CONVERT_Output_High_Z = 0, AI_CONVERT_Output_Ground = 1, AI_CONVERT_Output_Enable_Low = 2, AI_CONVERT_Output_Enable_High = 3 }
enum	Second_IRQ_A_Enable_Bits {   AI_SC_TC_Second_Irq_Enable = _bit0, AI_START1_Second_Irq_Enable = _bit1, AI_START2_Second_Irq_Enable = _bit2, AI_START_Second_Irq_Enable = _bit3,   AI_STOP_Second_Irq_Enable = _bit4, AI_Error_Second_Irq_Enable = _bit5, G0_TC_Second_Irq_Enable = _bit6, AI_FIFO_Second_Irq_Enable = _bit7,   G0_Gate_Second_Irq_Enable = _bit8, Pass_Thru_0_Second_Irq_Enable = _bit9 }
enum	Second_IRQ_B_Enable_Bits {   AO_BC_TC_Second_Irq_Enable = _bit0, AO_START1_Second_Irq_Enable = _bit1, AO_UPDATE_Second_Irq_Enable = _bit2, AO_START_Second_Irq_Enable = _bit3,   AO_STOP_Second_Irq_Enable = _bit4, AO_Error_Second_Irq_Enable = _bit5, AO_UC_TC_Second_Irq_Enable = _bit6, AO_UI2_TC_Second_Irq_Enable = _bit7,   AO_FIFO_Second_Irq_Enable = _bit8, G1_TC_Second_Irq_Enable = _bit9, G1_Gate_Second_Irq_Enable = _bit10, Pass_Thru_1_Second_Irq_Enable = _bit11 }
enum	AO_Personal_Bits {   AO_Interval_Buffer_Mode = 1 << 3, AO_BC_Source_Select = 1 << 4, AO_UPDATE_Pulse_Width = 1 << 5, AO_UPDATE_Pulse_Timebase = 1 << 6,   AO_UPDATE_Original_Pulse = 1 << 7, AO_DMA_PIO_Control = 1 << 8, AO_AOFREQ_Polarity = 1 << 9, AO_FIFO_Enable = 1 << 10,   AO_FIFO_Flags_Polarity = 1 << 11, AO_TMRDACWR_Pulse_Width = 1 << 12, AO_Fast_CPU = 1 << 13, AO_Number_Of_DAC_Packages = 1 << 14,   AO_Multiple_DACS_Per_Package = 1 << 15 }
enum	RTSI_Trig_B_Output_Bits { RTSI_Sub_Selection_1_Bit = 0x8000 }
enum	ao_update_output_selection { AO_Update_Output_High_Z = 0, AO_Update_Output_Ground = 1, AO_Update_Output_Enable_Low = 2, AO_Update_Output_Enable_High = 3 }
enum	XXX_Status_Bits { PROMOUT = 0x1, AI_FIFO_LOWER_NOT_EMPTY = 0x8 }
enum	AI_AO_Select_Bits { AI_DMA_Select_Shift = 0, AI_DMA_Select_Mask = 0xf, AO_DMA_Select_Shift = 4, AO_DMA_Select_Mask = 0xf << AO_DMA_Select_Shift }
enum	Configuration_Memory_Low_Bits { AI_DITHER = 0x200, AI_LAST_CHANNEL = 0x8000 }
enum	Configuration_Memory_High_Bits { AI_AC_COUPLE = 0x800, AI_DIFFERENTIAL = 0x1000, AI_COMMON = 0x2000, AI_GROUND = 0x3000 }
enum	windowed_regs_67xx_61xx {   AO_Immediate_671x = 0x11, AO_Timed_611x = 0x10, AO_FIFO_Offset_Load_611x = 0x13, AO_Later_Single_Point_Updates = 0x14,   AO_Waveform_Generation_611x = 0x15, AO_Misc_611x = 0x16, AO_Calibration_Channel_Select_67xx = 0x17, AO_Configuration_2_67xx = 0x18,   CAL_ADC_Command_67xx = 0x19, CAL_ADC_Status_67xx = 0x1a, CAL_ADC_Data_67xx = 0x1b, CAL_ADC_Config_Data_High_Word_67xx = 0x1c,   CAL_ADC_Config_Data_Low_Word_67xx = 0x1d }
enum	AO_Misc_611x_Bits { CLEAR_WG = 1 }
enum	cs5529_configuration_bits {   CSCFG_CAL_CONTROL_MASK = 0x7, CSCFG_SELF_CAL_OFFSET = 0x1, CSCFG_SELF_CAL_GAIN = 0x2, CSCFG_SELF_CAL_OFFSET_GAIN = 0x3,   CSCFG_SYSTEM_CAL_OFFSET = 0x5, CSCFG_SYSTEM_CAL_GAIN = 0x6, CSCFG_DONE = 1 << 3, CSCFG_POWER_SAVE_SELECT = 1 << 4,   CSCFG_PORT_MODE = 1 << 5, CSCFG_RESET_VALID = 1 << 6, CSCFG_RESET = 1 << 7, CSCFG_UNIPOLAR = 1 << 12,   CSCFG_WORD_RATE_2180_CYCLES = 0x0 << 13, CSCFG_WORD_RATE_1092_CYCLES = 0x1 << 13, CSCFG_WORD_RATE_532_CYCLES = 0x2 << 13, CSCFG_WORD_RATE_388_CYCLES = 0x3 << 13,   CSCFG_WORD_RATE_324_CYCLES = 0x4 << 13, CSCFG_WORD_RATE_17444_CYCLES = 0x5 << 13, CSCFG_WORD_RATE_8724_CYCLES = 0x6 << 13, CSCFG_WORD_RATE_4364_CYCLES = 0x7 << 13,   CSCFG_WORD_RATE_MASK = 0x7 << 13, CSCFG_LOW_POWER = 1 << 16 }
enum	cs5529_command_bits {   CSCMD_POWER_SAVE = 0x1, CSCMD_REGISTER_SELECT_MASK = 0xe, CSCMD_OFFSET_REGISTER = 0x0, CSCMD_GAIN_REGISTER = 0x2,   CSCMD_CONFIG_REGISTER = 0x4, CSCMD_READ = 0x10, CSCMD_CONTINUOUS_CONVERSIONS = 0x20, CSCMD_SINGLE_CONVERSION = 0x40,   CSCMD_COMMAND = 0x80 }
enum	cs5529_status_bits { CSS_ADC_BUSY = 0x1, CSS_OSC_DETECT = 0x2, CSS_OVERRANGE = 0x4 }
enum	{   ai_gain_16, ai_gain_8, ai_gain_14, ai_gain_4,   ai_gain_611x, ai_gain_622x, ai_gain_628x, ai_gain_6143 }
enum	caldac_enum {   caldac_none = 0, mb88341, dac8800, dac8043,   ad8522, ad8804, ad8842, ad8804_debug }
enum	ni_reg_type {   ni_reg_normal = 0x0, ni_reg_611x = 0x1, ni_reg_6711 = 0x2, ni_reg_6713 = 0x4,   ni_reg_67xx_mask = 0x6, ni_reg_6xxx_mask = 0x7, ni_reg_622x = 0x8, ni_reg_625x = 0x10,   ni_reg_628x = 0x18, ni_reg_m_series_mask = 0x18, ni_reg_6143 = 0x20 }
enum	m_series_register_offsets {   M_Offset_CDIO_DMA_Select = 0x7, M_Offset_SCXI_Status = 0x7, M_Offset_AI_AO_Select = 0x9, M_Offset_SCXI_Serial_Data_In = 0x9,   M_Offset_G0_G1_Select = 0xb, M_Offset_Misc_Command = 0xf, M_Offset_SCXI_Serial_Data_Out = 0x11, M_Offset_SCXI_Control = 0x13,   M_Offset_SCXI_Output_Enable = 0x15, M_Offset_AI_FIFO_Data = 0x1c, M_Offset_Static_Digital_Output = 0x24, M_Offset_Static_Digital_Input = 0x24,   M_Offset_DIO_Direction = 0x28, M_Offset_Cal_PWM = 0x40, M_Offset_AI_Config_FIFO_Data = 0x5e, M_Offset_Interrupt_C_Enable = 0x88,   M_Offset_Interrupt_C_Status = 0x88, M_Offset_Analog_Trigger_Control = 0x8c, M_Offset_AO_Serial_Interrupt_Enable = 0xa0, M_Offset_AO_Serial_Interrupt_Ack = 0xa1,   M_Offset_AO_Serial_Interrupt_Status = 0xa1, M_Offset_AO_Calibration = 0xa3, M_Offset_AO_FIFO_Data = 0xa4, M_Offset_PFI_Filter = 0xb0,   M_Offset_RTSI_Filter = 0xb4, M_Offset_SCXI_Legacy_Compatibility = 0xbc, M_Offset_Interrupt_A_Ack = 0x104, M_Offset_AI_Status_1 = 0x104,   M_Offset_Interrupt_B_Ack = 0x106, M_Offset_AO_Status_1 = 0x106, M_Offset_AI_Command_2 = 0x108, M_Offset_G01_Status = 0x108,   M_Offset_AO_Command_2 = 0x10a, M_Offset_AO_Status_2 = 0x10c, M_Offset_G0_Command = 0x10c, M_Offset_G1_Command = 0x10e,   M_Offset_G0_HW_Save = 0x110, M_Offset_G0_HW_Save_High = 0x110, M_Offset_AI_Command_1 = 0x110, M_Offset_G0_HW_Save_Low = 0x112,   M_Offset_AO_Command_1 = 0x112, M_Offset_G1_HW_Save = 0x114, M_Offset_G1_HW_Save_High = 0x114, M_Offset_G1_HW_Save_Low = 0x116,   M_Offset_AI_Mode_1 = 0x118, M_Offset_G0_Save = 0x118, M_Offset_G0_Save_High = 0x118, M_Offset_AI_Mode_2 = 0x11a,   M_Offset_G0_Save_Low = 0x11a, M_Offset_AI_SI_Load_A = 0x11c, M_Offset_G1_Save = 0x11c, M_Offset_G1_Save_High = 0x11c,   M_Offset_G1_Save_Low = 0x11e, M_Offset_AI_SI_Load_B = 0x120, M_Offset_AO_UI_Save = 0x120, M_Offset_AI_SC_Load_A = 0x124,   M_Offset_AO_BC_Save = 0x124, M_Offset_AI_SC_Load_B = 0x128, M_Offset_AO_UC_Save = 0x128, M_Offset_AI_SI2_Load_A = 0x12c,   M_Offset_AI_SI2_Load_B = 0x130, M_Offset_G0_Mode = 0x134, M_Offset_G1_Mode = 0x136, M_Offset_Joint_Status_1 = 0x136,   M_Offset_G0_Load_A = 0x138, M_Offset_Joint_Status_2 = 0x13a, M_Offset_G0_Load_B = 0x13c, M_Offset_G1_Load_A = 0x140,   M_Offset_G1_Load_B = 0x144, M_Offset_G0_Input_Select = 0x148, M_Offset_G1_Input_Select = 0x14a, M_Offset_AO_Mode_1 = 0x14c,   M_Offset_AO_Mode_2 = 0x14e, M_Offset_AO_UI_Load_A = 0x150, M_Offset_AO_UI_Load_B = 0x154, M_Offset_AO_BC_Load_A = 0x158,   M_Offset_AO_BC_Load_B = 0x15c, M_Offset_AO_UC_Load_A = 0x160, M_Offset_AO_UC_Load_B = 0x164, M_Offset_Clock_and_FOUT = 0x170,   M_Offset_IO_Bidirection_Pin = 0x172, M_Offset_RTSI_Trig_Direction = 0x174, M_Offset_Interrupt_Control = 0x176, M_Offset_AI_Output_Control = 0x178,   M_Offset_Analog_Trigger_Etc = 0x17a, M_Offset_AI_START_STOP_Select = 0x17c, M_Offset_AI_Trigger_Select = 0x17e, M_Offset_AI_SI_Save = 0x180,   M_Offset_AI_DIV_Load_A = 0x180, M_Offset_AI_SC_Save = 0x184, M_Offset_AO_Start_Select = 0x184, M_Offset_AO_Trigger_Select = 0x186,   M_Offset_AO_Mode_3 = 0x18c, M_Offset_G0_Autoincrement = 0x188, M_Offset_G1_Autoincrement = 0x18a, M_Offset_Joint_Reset = 0x190,   M_Offset_Interrupt_A_Enable = 0x192, M_Offset_Interrupt_B_Enable = 0x196, M_Offset_AI_Personal = 0x19a, M_Offset_AO_Personal = 0x19c,   M_Offset_RTSI_Trig_A_Output = 0x19e, M_Offset_RTSI_Trig_B_Output = 0x1a0, M_Offset_RTSI_Shared_MUX = 0x1a2, M_Offset_AO_Output_Control = 0x1ac,   M_Offset_AI_Mode_3 = 0x1ae, M_Offset_Configuration_Memory_Clear = 0x1a4, M_Offset_AI_FIFO_Clear = 0x1a6, M_Offset_AO_FIFO_Clear = 0x1a8,   M_Offset_G0_Counting_Mode = 0x1b0, M_Offset_G1_Counting_Mode = 0x1b2, M_Offset_G0_Second_Gate = 0x1b4, M_Offset_G1_Second_Gate = 0x1b6,   M_Offset_G0_DMA_Config = 0x1b8, M_Offset_G0_DMA_Status = 0x1b8, M_Offset_G1_DMA_Config = 0x1ba, M_Offset_G1_DMA_Status = 0x1ba,   M_Offset_G0_MSeries_ABZ = 0x1c0, M_Offset_G1_MSeries_ABZ = 0x1c2, M_Offset_Clock_and_Fout2 = 0x1c4, M_Offset_PLL_Control = 0x1c6,   M_Offset_PLL_Status = 0x1c8, M_Offset_PFI_Output_Select_1 = 0x1d0, M_Offset_PFI_Output_Select_2 = 0x1d2, M_Offset_PFI_Output_Select_3 = 0x1d4,   M_Offset_PFI_Output_Select_4 = 0x1d6, M_Offset_PFI_Output_Select_5 = 0x1d8, M_Offset_PFI_Output_Select_6 = 0x1da, M_Offset_PFI_DI = 0x1dc,   M_Offset_PFI_DO = 0x1de, M_Offset_AI_Config_FIFO_Bypass = 0x218, M_Offset_SCXI_DIO_Enable = 0x21c, M_Offset_CDI_FIFO_Data = 0x220,   M_Offset_CDO_FIFO_Data = 0x220, M_Offset_CDIO_Status = 0x224, M_Offset_CDIO_Command = 0x224, M_Offset_CDI_Mode = 0x228,   M_Offset_CDO_Mode = 0x22c, M_Offset_CDI_Mask_Enable = 0x230, M_Offset_CDO_Mask_Enable = 0x234 }
enum	MSeries_AI_Config_FIFO_Data_Bits {   MSeries_AI_Config_Channel_Type_Mask = 0x7 << 6, MSeries_AI_Config_Channel_Type_Calibration_Bits = 0x0, MSeries_AI_Config_Channel_Type_Differential_Bits = 0x1 << 6, MSeries_AI_Config_Channel_Type_Common_Ref_Bits = 0x2 << 6,   MSeries_AI_Config_Channel_Type_Ground_Ref_Bits = 0x3 << 6, MSeries_AI_Config_Channel_Type_Aux_Bits = 0x5 << 6, MSeries_AI_Config_Channel_Type_Ghost_Bits = 0x7 << 6, MSeries_AI_Config_Polarity_Bit = 0x1000,   MSeries_AI_Config_Dither_Bit = 0x2000, MSeries_AI_Config_Last_Channel_Bit = 0x4000 }
enum	MSeries_Clock_and_Fout2_Bits {   MSeries_PLL_In_Source_Select_RTSI0_Bits = 0xb, MSeries_PLL_In_Source_Select_Star_Trigger_Bits = 0x14, MSeries_PLL_In_Source_Select_RTSI7_Bits = 0x1b, MSeries_PLL_In_Source_Select_PXI_Clock10 = 0x1d,   MSeries_PLL_In_Source_Select_Mask = 0x1f, MSeries_Timebase1_Select_Bit = 0x20, MSeries_Timebase3_Select_Bit = 0x40, MSeries_RTSI_10MHz_Bit = 0x80 }
enum	MSeries_PLL_Control_Bits {   MSeries_PLL_Enable_Bit = 0x1000, MSeries_PLL_VCO_Mode_200_325MHz_Bits = 0x0, MSeries_PLL_VCO_Mode_175_225MHz_Bits = 0x2000, MSeries_PLL_VCO_Mode_100_225MHz_Bits = 0x4000,   MSeries_PLL_VCO_Mode_75_150MHz_Bits = 0x6000 }
enum	MSeries_PLL_Status { MSeries_PLL_Locked_Bit = 0x1 }
enum	MSeries_AI_Config_FIFO_Bypass_Bits {   MSeries_AI_Bypass_Channel_Mask = 0x7, MSeries_AI_Bypass_Bank_Mask = 0x78, MSeries_AI_Bypass_Cal_Sel_Pos_Mask = 0x380, MSeries_AI_Bypass_Cal_Sel_Neg_Mask = 0x1c00,   MSeries_AI_Bypass_Mode_Mux_Mask = 0x6000, MSeries_AO_Bypass_AO_Cal_Sel_Mask = 0x38000, MSeries_AI_Bypass_Gain_Mask = 0x1c0000, MSeries_AI_Bypass_Dither_Bit = 0x200000,   MSeries_AI_Bypass_Polarity_Bit = 0x400000, MSeries_AI_Bypass_Config_FIFO_Bit = 0x80000000 }
enum	MSeries_AO_Config_Bank_Bits {   MSeries_AO_DAC_Offset_Select_Mask = 0x7, MSeries_AO_DAC_Offset_0V_Bits = 0x0, MSeries_AO_DAC_Offset_5V_Bits = 0x1, MSeries_AO_DAC_Reference_Mask = 0x38,   MSeries_AO_DAC_Reference_10V_Internal_Bits = 0x0, MSeries_AO_DAC_Reference_5V_Internal_Bits = 0x8, MSeries_AO_Update_Timed_Bit = 0x40, MSeries_AO_Bipolar_Bit = 0x80 }
enum	MSeries_AO_Reference_Attenuation_Bits { MSeries_Attenuate_x5_Bit = 0x1 }
enum	MSeries_Gi_DMA_Config_Bits {   Gi_DMA_BankSW_Error_Bit = 0x10, Gi_DMA_Reset_Bit = 0x8, Gi_DMA_Int_Enable_Bit = 0x4, Gi_DMA_Write_Bit = 0x2,   Gi_DMA_Enable_Bit = 0x1 }
enum	CDIO_DMA_Select_Bits { CDI_DMA_Select_Shift = 0, CDI_DMA_Select_Mask = 0xf, CDO_DMA_Select_Shift = 4, CDO_DMA_Select_Mask = 0xf << CDO_DMA_Select_Shift }
enum	CDIO_Status_Bits {   CDO_FIFO_Empty_Bit = 0x1, CDO_FIFO_Full_Bit = 0x2, CDO_FIFO_Request_Bit = 0x4, CDO_Overrun_Bit = 0x8,   CDO_Underflow_Bit = 0x10, CDI_FIFO_Empty_Bit = 0x10000, CDI_FIFO_Full_Bit = 0x20000, CDI_FIFO_Request_Bit = 0x40000,   CDI_Overrun_Bit = 0x80000, CDI_Overflow_Bit = 0x100000 }
enum	CDIO_Command_Bits {   CDO_Disarm_Bit = 0x1, CDO_Arm_Bit = 0x2, CDI_Disarm_Bit = 0x4, CDI_Arm_Bit = 0x8,   CDO_Reset_Bit = 0x10, CDI_Reset_Bit = 0x20, CDO_Error_Interrupt_Enable_Set_Bit = 0x40, CDO_Error_Interrupt_Enable_Clear_Bit = 0x80,   CDI_Error_Interrupt_Enable_Set_Bit = 0x100, CDI_Error_Interrupt_Enable_Clear_Bit = 0x200, CDO_FIFO_Request_Interrupt_Enable_Set_Bit = 0x400, CDO_FIFO_Request_Interrupt_Enable_Clear_Bit = 0x800,   CDI_FIFO_Request_Interrupt_Enable_Set_Bit = 0x1000, CDI_FIFO_Request_Interrupt_Enable_Clear_Bit = 0x2000, CDO_Error_Interrupt_Confirm_Bit = 0x4000, CDI_Error_Interrupt_Confirm_Bit = 0x8000,   CDO_Empty_FIFO_Interrupt_Enable_Set_Bit = 0x10000, CDO_Empty_FIFO_Interrupt_Enable_Clear_Bit = 0x20000, CDO_SW_Update_Bit = 0x80000, CDI_SW_Update_Bit = 0x100000 }
enum	CDI_Mode_Bits {   CDI_Sample_Source_Select_Mask = 0x3f, CDI_Halt_On_Error_Bit = 0x200, CDI_Polarity_Bit = 0x400, CDI_FIFO_Mode_Bit = 0x800,   CDI_Data_Lane_Mask = 0x3000, CDI_Data_Lane_0_15_Bits = 0x0, CDI_Data_Lane_16_31_Bits = 0x1000, CDI_Data_Lane_0_7_Bits = 0x0,   CDI_Data_Lane_8_15_Bits = 0x1000, CDI_Data_Lane_16_23_Bits = 0x2000, CDI_Data_Lane_24_31_Bits = 0x3000 }
enum	CDO_Mode_Bits {   CDO_Sample_Source_Select_Mask = 0x3f, CDO_Retransmit_Bit = 0x100, CDO_Halt_On_Error_Bit = 0x200, CDO_Polarity_Bit = 0x400,   CDO_FIFO_Mode_Bit = 0x800, CDO_Data_Lane_Mask = 0x3000, CDO_Data_Lane_0_15_Bits = 0x0, CDO_Data_Lane_16_31_Bits = 0x1000,   CDO_Data_Lane_0_7_Bits = 0x0, CDO_Data_Lane_8_15_Bits = 0x1000, CDO_Data_Lane_16_23_Bits = 0x2000, CDO_Data_Lane_24_31_Bits = 0x3000 }
enum	Interrupt_C_Enable_Bits { Interrupt_Group_C_Enable_Bit = 0x1 }
enum	Interrupt_C_Status_Bits { Interrupt_Group_C_Status_Bit = 0x1 }

---

Define Documentation

#define _bit0   0x0001

Definition at line 49 of file ni_stc.h.

#define _bit1   0x0002

Definition at line 48 of file ni_stc.h.

#define _bit10   0x0400

Definition at line 39 of file ni_stc.h.

#define _bit11   0x0800

Definition at line 38 of file ni_stc.h.

#define _bit12   0x1000

Definition at line 37 of file ni_stc.h.

#define _bit13   0x2000

Definition at line 36 of file ni_stc.h.

#define _bit14   0x4000

Definition at line 35 of file ni_stc.h.

#define _bit15   0x8000

Definition at line 34 of file ni_stc.h.

#define _bit2   0x0004

Definition at line 47 of file ni_stc.h.

#define _bit3   0x0008

Definition at line 46 of file ni_stc.h.

#define _bit4   0x0010

Definition at line 45 of file ni_stc.h.

#define _bit5   0x0020

Definition at line 44 of file ni_stc.h.

#define _bit6   0x0040

Definition at line 43 of file ni_stc.h.

#define _bit7   0x0080

Definition at line 42 of file ni_stc.h.

#define _bit8   0x0100

Definition at line 41 of file ni_stc.h.

#define _bit9   0x0200

Definition at line 40 of file ni_stc.h.

#define ADC_FIFO_Clear   83

Definition at line 693 of file ni_stc.h.

#define ADC_FIFO_Data_611x   0x1c

Definition at line 782 of file ni_stc.h.

#define ADC_FIFO_Data_Register   0x1c

Definition at line 765 of file ni_stc.h.

#define AI_AIFREQ_Polarity   _bit4

Definition at line 509 of file ni_stc.h.

#define AI_Analog_Trigger_Reset   _bit14

Definition at line 161 of file ni_stc.h.

#define AI_AO_Select   0x09

Definition at line 714 of file ni_stc.h.

#define AI_Command_1_Register   8

Definition at line 160 of file ni_stc.h.

#define AI_Command_2_Register   4

Definition at line 125 of file ni_stc.h.

#define AI_Configuration_End   _bit8

Definition at line 433 of file ni_stc.h.

#define AI_Configuration_Start   _bit4

Definition at line 435 of file ni_stc.h.

#define AI_Continuous   _bit1

Definition at line 218 of file ni_stc.h.

#define AI_CONVERT_Original_Pulse   _bit9

Definition at line 504 of file ni_stc.h.

#define AI_CONVERT_Pulse   _bit0

Definition at line 175 of file ni_stc.h.

#define AI_CONVERT_Pulse_Timebase   _bit11

Definition at line 502 of file ni_stc.h.

#define AI_CONVERT_Pulse_Width   _bit10

Definition at line 503 of file ni_stc.h.

#define AI_CONVERT_Source_Polarity   _bit5

Definition at line 214 of file ni_stc.h.

#define AI_CONVERT_Source_Select

(

a

)

(((a) & 0x1f) << 11)

Definition at line 212 of file ni_stc.h.

#define AI_Delay_START   _bit14

Definition at line 576 of file ni_stc.h.

#define AI_Delayed_START1   _bit9

Definition at line 581 of file ni_stc.h.

#define AI_Delayed_START2   _bit10

Definition at line 580 of file ni_stc.h.

#define AI_Disarm   _bit13

Definition at line 162 of file ni_stc.h.

#define AI_DIV_Arm   _bit8

Definition at line 167 of file ni_stc.h.

#define AI_DIV_Load   _bit7

Definition at line 168 of file ni_stc.h.

#define AI_DIV_Load_A_Register   64

Definition at line 397 of file ni_stc.h.

#define AI_End_On_End_Of_Scan   _bit14

Definition at line 127 of file ni_stc.h.

#define AI_End_On_SC_TC   _bit15

Definition at line 126 of file ni_stc.h.

#define AI_EOC_Polarity   _bit14

Definition at line 499 of file ni_stc.h.

#define AI_Error_Interrupt_Ack   _bit13

Definition at line 58 of file ni_stc.h.

#define AI_Error_Interrupt_Enable   _bit5

Definition at line 446 of file ni_stc.h.

#define AI_External_Gate_Mode   _bit8

Definition at line 582 of file ni_stc.h.

#define AI_External_Gate_Polarity   _bit5

Definition at line 587 of file ni_stc.h.

#define AI_External_Gate_Select

(

a

)

((a) & 0x1f)

Definition at line 588 of file ni_stc.h.

#define AI_External_MUX_Present   _bit12

Definition at line 225 of file ni_stc.h.

#define AI_EXTMUX_CLK_Output_Select

(

x

)

(((x) & 0x3) << 6)

Definition at line 362 of file ni_stc.h.

#define AI_EXTMUX_CLK_Pulse   _bit3

Definition at line 172 of file ni_stc.h.

#define AI_EXTMUX_CLK_Pulse_Width   _bit6

Definition at line 507 of file ni_stc.h.

#define AI_FIFO_Empty_St   0x1000

Definition at line 72 of file ni_stc.h.

#define AI_FIFO_Flags_Polarity   _bit8

Definition at line 505 of file ni_stc.h.

#define AI_FIFO_Full_St   0x4000

Definition at line 70 of file ni_stc.h.

#define AI_FIFO_Half_Full_St   0x2000

Definition at line 71 of file ni_stc.h.

#define AI_FIFO_Interrupt_Enable   _bit7

Definition at line 444 of file ni_stc.h.

#define AI_FIFO_Mode_F   (2<<6)

Definition at line 584 of file ni_stc.h.

#define AI_FIFO_Mode_HF   (1<<6)

Definition at line 585 of file ni_stc.h.

#define AI_FIFO_Mode_HF_to_E   (3<<6)

Definition at line 583 of file ni_stc.h.

#define AI_FIFO_Mode_NE   (0<<6)

Definition at line 586 of file ni_stc.h.

#define AI_FIFO_Offset_Load_611x   0x05

Definition at line 783 of file ni_stc.h.

#define AI_FIFO_Request_St   0x0002

Definition at line 83 of file ni_stc.h.

#define AI_LOCALMUX_CLK_Output_Select

(

x

)

((x)<<4)

Definition at line 363 of file ni_stc.h.

#define AI_LOCALMUX_CLK_Pulse   _bit2

Definition at line 173 of file ni_stc.h.

#define AI_LOCALMUX_CLK_Pulse_Width   _bit5

Definition at line 508 of file ni_stc.h.

#define AI_Mode_1_Register   12

Definition at line 211 of file ni_stc.h.

#define AI_Mode_1_Reserved   _bit2

Definition at line 217 of file ni_stc.h.

#define AI_Mode_2_Register   13

Definition at line 221 of file ni_stc.h.

#define AI_Mode_3_Register   87

Definition at line 574 of file ni_stc.h.

#define AI_Output_Control_Register   60

Definition at line 359 of file ni_stc.h.

#define AI_Overflow_St   0x0400

Definition at line 74 of file ni_stc.h.

#define AI_Overrun_Mode   _bit7

Definition at line 506 of file ni_stc.h.

#define AI_Overrun_St   0x0800

Definition at line 73 of file ni_stc.h.

#define AI_Personal_Register   77

Definition at line 497 of file ni_stc.h.

#define AI_Pre_Trigger   _bit13

Definition at line 224 of file ni_stc.h.

#define AI_Reset   _bit0

Definition at line 439 of file ni_stc.h.

#define AI_SC_Arm   _bit6

Definition at line 169 of file ni_stc.h.

#define AI_SC_Gate_Enable   _bit15

Definition at line 222 of file ni_stc.h.

#define AI_SC_Initial_Load_Source   _bit2

Definition at line 231 of file ni_stc.h.

#define AI_SC_Load   _bit5

Definition at line 170 of file ni_stc.h.

#define AI_SC_Load_A_Registers   18

Definition at line 237 of file ni_stc.h.

#define AI_SC_Load_B_Registers   20

Definition at line 238 of file ni_stc.h.

#define AI_SC_Reload_Mode   _bit1

Definition at line 232 of file ni_stc.h.

#define AI_SC_Save_Registers   66

Definition at line 240 of file ni_stc.h.

#define AI_SC_Save_Trace   _bit10

Definition at line 129 of file ni_stc.h.

#define AI_SC_Switch_Load_On_TC   _bit4

Definition at line 133 of file ni_stc.h.

#define AI_SC_TC_Error_Confirm   _bit7

Definition at line 64 of file ni_stc.h.

#define AI_SC_TC_Error_St   0x0200

Definition at line 75 of file ni_stc.h.

#define AI_SC_TC_Interrupt_Ack   _bit8

Definition at line 63 of file ni_stc.h.

#define AI_SC_TC_Interrupt_Enable   _bit0

Definition at line 451 of file ni_stc.h.

#define AI_SC_TC_Output_Select

(

x

)

((x)<<2)

Definition at line 364 of file ni_stc.h.

#define AI_SC_TC_Pulse   _bit1

Definition at line 174 of file ni_stc.h.

#define AI_SC_TC_St   0x0040

Definition at line 78 of file ni_stc.h.

#define AI_SC_Write_Switch   _bit0

Definition at line 233 of file ni_stc.h.

#define AI_SCAN_IN_PROG_Output_Select

(

x

)

(((x) & 0x3) << 8)

Definition at line 361 of file ni_stc.h.

#define AI_SCAN_IN_PROG_Pulse   _bit4

Definition at line 171 of file ni_stc.h.

#define AI_SHIFTIN_Polarity   _bit12

Definition at line 501 of file ni_stc.h.

#define AI_SHIFTIN_Pulse_Width   _bit15

Definition at line 498 of file ni_stc.h.

#define AI_SI2_Arm   _bit12

Definition at line 163 of file ni_stc.h.

#define AI_SI2_Initial_Load_Source   _bit9

Definition at line 226 of file ni_stc.h.

#define AI_SI2_Load   _bit11

Definition at line 164 of file ni_stc.h.

#define AI_SI2_Load_A_Register   23

Definition at line 242 of file ni_stc.h.

#define AI_SI2_Load_B_Register   25

Definition at line 243 of file ni_stc.h.

#define AI_SI2_Reload_Mode   _bit8

Definition at line 227 of file ni_stc.h.

#define AI_SI2_Source_Select   _bit11

Definition at line 579 of file ni_stc.h.

#define AI_SI_Arm   _bit10

Definition at line 165 of file ni_stc.h.

#define AI_SI_Initial_Load_Source   _bit7

Definition at line 228 of file ni_stc.h.

#define AI_SI_Load   _bit9

Definition at line 166 of file ni_stc.h.

#define AI_SI_Load_A_Registers   14

Definition at line 235 of file ni_stc.h.

#define AI_SI_Load_B_Registers   16

Definition at line 236 of file ni_stc.h.

#define AI_SI_Reload_Mode

(

a

)

(((a) & 0x7)<<4)

Definition at line 229 of file ni_stc.h.

#define AI_SI_Save_Registers   64

Definition at line 239 of file ni_stc.h.

#define AI_SI_Source_Polarity   _bit4

Definition at line 215 of file ni_stc.h.

#define AI_SI_Source_select

(

a

)

(((a) & 0x1f) << 6)

Definition at line 213 of file ni_stc.h.

#define AI_SI_Special_Trigger_Delay   _bit12

Definition at line 578 of file ni_stc.h.

#define AI_SI_Switch_Load_On_SC_TC   _bit9

Definition at line 130 of file ni_stc.h.

#define AI_SI_Switch_Load_On_STOP   _bit8

Definition at line 131 of file ni_stc.h.

#define AI_SI_Switch_Load_On_TC   _bit7

Definition at line 132 of file ni_stc.h.

#define AI_SI_Write_Switch   _bit3

Definition at line 230 of file ni_stc.h.

#define AI_SOC_Polarity   _bit13

Definition at line 500 of file ni_stc.h.

#define AI_Software_Gate   _bit13

Definition at line 577 of file ni_stc.h.

#define AI_START1_Disable   _bit11

Definition at line 128 of file ni_stc.h.

#define AI_START1_Edge   _bit5

Definition at line 394 of file ni_stc.h.

#define AI_START1_Interrupt_Ack   _bit9

Definition at line 62 of file ni_stc.h.

#define AI_START1_Interrupt_Enable   _bit1

Definition at line 450 of file ni_stc.h.

#define AI_START1_Polarity   _bit15

Definition at line 388 of file ni_stc.h.

#define AI_START1_Pulse   _bit0

Definition at line 137 of file ni_stc.h.

#define AI_START1_Select

(

a

)

((a) & 0x1f)

Definition at line 395 of file ni_stc.h.

#define AI_START1_St   0x0080

Definition at line 77 of file ni_stc.h.

#define AI_START1_Sync   _bit6

Definition at line 393 of file ni_stc.h.

#define AI_START2_Edge   _bit12

Definition at line 391 of file ni_stc.h.

#define AI_START2_Interrupt_Ack   _bit10

Definition at line 61 of file ni_stc.h.

#define AI_START2_Interrupt_Enable   _bit2

Definition at line 449 of file ni_stc.h.

#define AI_START2_Polarity   _bit14

Definition at line 389 of file ni_stc.h.

#define AI_START2_Pulse   _bit1

Definition at line 136 of file ni_stc.h.

#define AI_START2_Select

(

a

)

(((a) & 0x1f) << 7)

Definition at line 392 of file ni_stc.h.

#define AI_START2_St   0x0100

Definition at line 76 of file ni_stc.h.

#define AI_START2_Sync   _bit13

Definition at line 390 of file ni_stc.h.

#define AI_START_Edge   _bit5

Definition at line 384 of file ni_stc.h.

#define AI_START_Interrupt_Ack   _bit11

Definition at line 60 of file ni_stc.h.

#define AI_START_Interrupt_Enable   _bit3

Definition at line 448 of file ni_stc.h.

#define AI_START_Output_Select   _bit10

Definition at line 360 of file ni_stc.h.

#define AI_START_Polarity   _bit15

Definition at line 378 of file ni_stc.h.

#define AI_START_Pulse   _bit2

Definition at line 135 of file ni_stc.h.

#define AI_START_Select

(

a

)

((a) & 0x1f)

Definition at line 385 of file ni_stc.h.

#define AI_START_St   0x0020

Definition at line 79 of file ni_stc.h.

#define AI_Start_Stop   _bit3

Definition at line 216 of file ni_stc.h.

#define AI_Start_Stop_Gate_Enable   _bit14

Definition at line 223 of file ni_stc.h.

#define AI_START_STOP_Select_Register   62

Definition at line 377 of file ni_stc.h.

#define AI_START_Sync   _bit6

Definition at line 383 of file ni_stc.h.

#define AI_Status_1_Register   2

Definition at line 68 of file ni_stc.h.

#define AI_Status_2_Register   5

Definition at line 86 of file ni_stc.h.

#define AI_STOP_Edge   _bit12

Definition at line 381 of file ni_stc.h.

#define AI_STOP_Interrupt_Ack   _bit12

Definition at line 59 of file ni_stc.h.

#define AI_STOP_Interrupt_Enable   _bit4

Definition at line 447 of file ni_stc.h.

#define AI_STOP_Polarity   _bit14

Definition at line 379 of file ni_stc.h.

#define AI_STOP_Pulse   _bit3

Definition at line 134 of file ni_stc.h.

#define AI_STOP_Select

(

a

)

(((a) & 0x1f)<<7)

Definition at line 382 of file ni_stc.h.

#define AI_STOP_St   0x0010

Definition at line 80 of file ni_stc.h.

#define AI_STOP_Sync   _bit13

Definition at line 380 of file ni_stc.h.

#define AI_Trigger_Length   _bit15

Definition at line 575 of file ni_stc.h.

#define AI_Trigger_Once   _bit0

Definition at line 219 of file ni_stc.h.

#define AI_Trigger_Select_Register   63

Definition at line 387 of file ni_stc.h.

#define AIDMA_Select_6143   0x09

Definition at line 795 of file ni_stc.h.

#define AIFIFO_Control_6143   0x88

Definition at line 798 of file ni_stc.h.

#define AIFIFO_Data_6143   0x8C

Definition at line 796 of file ni_stc.h.

#define AIFIFO_DMAThreshold_6143   0x90

Definition at line 800 of file ni_stc.h.

#define AIFIFO_Flag_6143   0x84

Definition at line 797 of file ni_stc.h.

#define AIFIFO_Status_6143   0x88

Definition at line 799 of file ni_stc.h.

#define AIFIFO_Words_Available_6143   0x94

Definition at line 801 of file ni_stc.h.

#define Analog_Trigger_Drive   _bit4

Definition at line 680 of file ni_stc.h.

#define Analog_Trigger_Enable   _bit3

Definition at line 679 of file ni_stc.h.

#define Analog_Trigger_Etc_Register   61

Definition at line 607 of file ni_stc.h.

#define Analog_Trigger_Mode

(

x

)

((x) & 0x7)

Definition at line 678 of file ni_stc.h.

#define AO_Analog_Trigger_Reset   _bit15

Definition at line 178 of file ni_stc.h.

#define AO_AOFREQ_Enable   _bit12

Definition at line 403 of file ni_stc.h.

#define AO_BC_Arm   _bit6

Definition at line 187 of file ni_stc.h.

#define AO_BC_Gate_Enable   _bit11

Definition at line 143 of file ni_stc.h.

#define AO_BC_Initial_Load_Source   _bit2

Definition at line 281 of file ni_stc.h.

#define AO_BC_Load   _bit5

Definition at line 188 of file ni_stc.h.

#define AO_BC_Load_A_Register   44

Definition at line 290 of file ni_stc.h.

#define AO_BC_Load_A_Register_High   44

Definition at line 291 of file ni_stc.h.

#define AO_BC_Load_A_Register_Low   45

Definition at line 292 of file ni_stc.h.

#define AO_BC_Load_B_Register   46

Definition at line 293 of file ni_stc.h.

#define AO_BC_Load_B_Register_High   46

Definition at line 294 of file ni_stc.h.

#define AO_BC_Load_B_Register_Low   47

Definition at line 295 of file ni_stc.h.

#define AO_BC_Reload_Mode   _bit1

Definition at line 282 of file ni_stc.h.

#define AO_BC_Save_Registers   18

Definition at line 296 of file ni_stc.h.

#define AO_BC_Save_Trace   _bit10

Definition at line 144 of file ni_stc.h.

#define AO_BC_Switch_Load_On_TC   _bit4

Definition at line 150 of file ni_stc.h.

#define AO_BC_TC_Error_St   _bit11

Definition at line 112 of file ni_stc.h.

#define AO_BC_TC_Interrupt_Enable   _bit0

Definition at line 465 of file ni_stc.h.

#define AO_BC_TC_St   _bit7

Definition at line 116 of file ni_stc.h.

#define AO_BC_Write_Switch   _bit0

Definition at line 283 of file ni_stc.h.

#define AO_Bipolar   _bit0

Definition at line 768 of file ni_stc.h.

#define AO_Channel

(

x

)

((x) << 8)

Definition at line 772 of file ni_stc.h.

#define AO_Command_1_Register   9

Definition at line 177 of file ni_stc.h.

#define AO_Command_2_Register   5

Definition at line 139 of file ni_stc.h.

#define AO_Configuration   0x16

Definition at line 767 of file ni_stc.h.

#define AO_Configuration_End   _bit9

Definition at line 432 of file ni_stc.h.

#define AO_Configuration_Start   _bit5

Definition at line 434 of file ni_stc.h.

#define AO_Continuous   _bit1

Definition at line 261 of file ni_stc.h.

#define AO_DAC0_Update_Mode   _bit2

Definition at line 191 of file ni_stc.h.

#define AO_DAC1_Update_Mode   _bit4

Definition at line 189 of file ni_stc.h.

#define AO_Deglitch   _bit1

Definition at line 769 of file ni_stc.h.

#define AO_Delayed_START1   _bit14

Definition at line 411 of file ni_stc.h.

#define AO_Disarm   _bit13

Definition at line 180 of file ni_stc.h.

#define AO_End_On_BC_TC

(

x

)

(((x) & 0x3) << 14)

Definition at line 140 of file ni_stc.h.

#define AO_Error_Interrupt_Enable   _bit5

Definition at line 460 of file ni_stc.h.

#define AO_Ext_Ref   _bit2

Definition at line 770 of file ni_stc.h.

#define AO_External_Gate_Enable   _bit15

Definition at line 556 of file ni_stc.h.

#define AO_External_Gate_Polarity   _bit3

Definition at line 560 of file ni_stc.h.

#define AO_External_Gate_Select

(

x

)

(((x)&0x1f)<<10)

Definition at line 557 of file ni_stc.h.

#define AO_FIFO_Empty_St   _bit12

Definition at line 111 of file ni_stc.h.

#define AO_FIFO_Full_St   _bit14

Definition at line 109 of file ni_stc.h.

#define AO_FIFO_Half_Full_St   _bit13

Definition at line 110 of file ni_stc.h.

#define AO_FIFO_Interrupt_Enable   _bit8

Definition at line 457 of file ni_stc.h.

#define AO_FIFO_Mode_Mask   ( 0x3 << 14 )

Definition at line 265 of file ni_stc.h.

#define AO_FIFO_Request_St   _bit1

Definition at line 122 of file ni_stc.h.

#define AO_FIFO_Retransmit_Enable   _bit13

Definition at line 272 of file ni_stc.h.

#define AO_Ground_Ref   _bit3

Definition at line 771 of file ni_stc.h.

#define AO_Last_Gate_Disable   _bit0

Definition at line 428 of file ni_stc.h.

#define AO_LDAC0_Source_Select   _bit1

Definition at line 192 of file ni_stc.h.

#define AO_LDAC1_Source_Select   _bit3

Definition at line 190 of file ni_stc.h.

#define AO_Mode_1_Register   38

Definition at line 254 of file ni_stc.h.

#define AO_Mode_2_Register   39

Definition at line 264 of file ni_stc.h.

#define AO_Mode_3_Register   70

Definition at line 419 of file ni_stc.h.

#define AO_Multiple_Channels   _bit5

Definition at line 257 of file ni_stc.h.

#define AO_Mute_A   _bit2

Definition at line 152 of file ni_stc.h.

#define AO_Mute_B   _bit3

Definition at line 151 of file ni_stc.h.

#define AO_Not_An_UPDATE   _bit2

Definition at line 426 of file ni_stc.h.

#define AO_Number_Of_Channels

(

x

)

(((x)&0xf)<<6)

Definition at line 558 of file ni_stc.h.

#define AO_Output_Control_Register   86

Definition at line 555 of file ni_stc.h.

#define AO_Overrun_St   _bit9

Definition at line 114 of file ni_stc.h.

#define AO_Personal_Register   78

Definition at line 511 of file ni_stc.h.

#define AO_Reset   _bit1

Definition at line 438 of file ni_stc.h.

#define AO_Software_Gate   _bit1

Definition at line 427 of file ni_stc.h.

#define AO_START1_Disable   _bit12

Definition at line 273 of file ni_stc.h.

#define AO_START1_Edge   _bit5

Definition at line 416 of file ni_stc.h.

#define AO_START1_Interrupt_Enable   _bit1

Definition at line 464 of file ni_stc.h.

#define AO_START1_Polarity   _bit13

Definition at line 412 of file ni_stc.h.

#define AO_START1_Pulse   _bit0

Definition at line 154 of file ni_stc.h.

#define AO_START1_Select

(

x

)

(((x)&0x1f)<<0)

Definition at line 417 of file ni_stc.h.

#define AO_START1_St   _bit8

Definition at line 115 of file ni_stc.h.

#define AO_START1_Sync   _bit6

Definition at line 415 of file ni_stc.h.

#define AO_START_Edge   _bit5

Definition at line 406 of file ni_stc.h.

#define AO_START_Interrupt_Enable   _bit3

Definition at line 462 of file ni_stc.h.

#define AO_START_Polarity   _bit13

Definition at line 402 of file ni_stc.h.

#define AO_START_Pulse   _bit14

Definition at line 179 of file ni_stc.h.

#define AO_START_Select

(

a

)

((a) & 0x1f)

Definition at line 407 of file ni_stc.h.

#define AO_Start_Select_Register   66

Definition at line 399 of file ni_stc.h.

#define AO_START_St   _bit10

Definition at line 113 of file ni_stc.h.

#define AO_Start_Stop_Gate_Enable   _bit13

Definition at line 141 of file ni_stc.h.

#define AO_START_Sync   _bit6

Definition at line 405 of file ni_stc.h.

#define AO_Status_1_Register   3

Definition at line 107 of file ni_stc.h.

#define AO_Status_2_Register   6

Definition at line 156 of file ni_stc.h.

#define AO_STOP_Interrupt_Enable   _bit4

Definition at line 461 of file ni_stc.h.

#define AO_Stop_On_BC_TC_Error   _bit3

Definition at line 425 of file ni_stc.h.

#define AO_Stop_On_BC_TC_Trigger_Error   _bit4

Definition at line 424 of file ni_stc.h.

#define AO_Stop_On_Overrun_Error   _bit5

Definition at line 423 of file ni_stc.h.

#define AO_Trigger_Length   _bit11

Definition at line 422 of file ni_stc.h.

#define AO_Trigger_Once   _bit0

Definition at line 262 of file ni_stc.h.

#define AO_Trigger_Select_Register   67

Definition at line 409 of file ni_stc.h.

#define AO_UC_Arm   _bit8

Definition at line 185 of file ni_stc.h.

#define AO_UC_Initial_Load_Source   _bit11

Definition at line 274 of file ni_stc.h.

#define AO_UC_Load   _bit7

Definition at line 186 of file ni_stc.h.

#define AO_UC_Load_A_Register   48

Definition at line 297 of file ni_stc.h.

#define AO_UC_Load_A_Register_High   48

Definition at line 298 of file ni_stc.h.

#define AO_UC_Load_A_Register_Low   49

Definition at line 299 of file ni_stc.h.

#define AO_UC_Load_B_Register   50

Definition at line 300 of file ni_stc.h.

#define AO_UC_Save_Registers   20

Definition at line 301 of file ni_stc.h.

#define AO_UC_Save_Trace   _bit12

Definition at line 142 of file ni_stc.h.

#define AO_UC_Switch_Load_Every_BC_TC   _bit12

Definition at line 421 of file ni_stc.h.

#define AO_UC_Switch_Load_Every_TC   _bit2

Definition at line 260 of file ni_stc.h.

#define AO_UC_Switch_Load_On_BC_TC   _bit6

Definition at line 148 of file ni_stc.h.

#define AO_UC_Switch_Load_On_TC   _bit5

Definition at line 149 of file ni_stc.h.

#define AO_UC_TC_Interrupt_Enable   _bit6

Definition at line 459 of file ni_stc.h.

#define AO_UC_TC_St   _bit6

Definition at line 117 of file ni_stc.h.

#define AO_UC_Write_Switch   _bit10

Definition at line 275 of file ni_stc.h.

#define AO_UI2_Arm_Disarm   _bit12

Definition at line 181 of file ni_stc.h.

#define AO_UI2_External_Gate_Enable   _bit15

Definition at line 410 of file ni_stc.h.

#define AO_UI2_External_Gate_Polarity   _bit14

Definition at line 401 of file ni_stc.h.

#define AO_UI2_External_Gate_Select

(

a

)

(((a) & 0x1f) << 7)

Definition at line 404 of file ni_stc.h.

#define AO_UI2_Initial_Load_Source   _bit9

Definition at line 276 of file ni_stc.h.

#define AO_UI2_Load   _bit11

Definition at line 182 of file ni_stc.h.

#define AO_UI2_Reload_Mode   _bit8

Definition at line 277 of file ni_stc.h.

#define AO_UI2_Software_Gate   _bit15

Definition at line 400 of file ni_stc.h.

#define AO_UI2_Source_Polarity   _bit12

Definition at line 413 of file ni_stc.h.

#define AO_UI2_Source_Select

(

x

)

(((x)&0x1f)<<7)

Definition at line 414 of file ni_stc.h.

#define AO_UI2_Switch_Load_Next_TC   _bit13

Definition at line 420 of file ni_stc.h.

#define AO_UI2_TC_Interrupt_Enable   _bit7

Definition at line 458 of file ni_stc.h.

#define AO_UI2_TC_St   _bit4

Definition at line 119 of file ni_stc.h.

#define AO_UI_Arm   _bit10

Definition at line 183 of file ni_stc.h.

#define AO_UI_Initial_Load_Source   _bit7

Definition at line 278 of file ni_stc.h.

#define AO_UI_Load   _bit9

Definition at line 184 of file ni_stc.h.

#define AO_UI_Load_A_Register   40

Definition at line 285 of file ni_stc.h.

#define AO_UI_Load_A_Register_High   40

Definition at line 286 of file ni_stc.h.

#define AO_UI_Load_A_Register_Low   41

Definition at line 287 of file ni_stc.h.

#define AO_UI_Load_B_Register   42

Definition at line 288 of file ni_stc.h.

#define AO_UI_Reload_Mode

(

x

)

(((x) & 0x7) << 4)

Definition at line 279 of file ni_stc.h.

#define AO_UI_Save_Registers   16

Definition at line 289 of file ni_stc.h.

#define AO_UI_Source_Polarity   _bit3

Definition at line 259 of file ni_stc.h.

#define AO_UI_Source_Select

(

x

)

(((x)&0x1f)<<6)

Definition at line 256 of file ni_stc.h.

#define AO_UI_Switch_Load_On_BC_TC   _bit9

Definition at line 145 of file ni_stc.h.

#define AO_UI_Switch_Load_On_Stop   _bit8

Definition at line 146 of file ni_stc.h.

#define AO_UI_Switch_Load_On_TC   _bit7

Definition at line 147 of file ni_stc.h.

#define AO_UI_Write_Switch   _bit3

Definition at line 280 of file ni_stc.h.

#define AO_UPDATE2_Output_Select

(

x

)

(((x)&0x3)<<4)

Definition at line 559 of file ni_stc.h.

#define AO_UPDATE2_Output_Toggle   _bit2

Definition at line 561 of file ni_stc.h.

#define AO_UPDATE2_Pulse   _bit1

Definition at line 153 of file ni_stc.h.

#define AO_UPDATE_Interrupt_Enable   _bit2

Definition at line 463 of file ni_stc.h.

#define AO_UPDATE_Pulse   _bit0

Definition at line 193 of file ni_stc.h.

#define AO_UPDATE_Source_Polarity   _bit4

Definition at line 258 of file ni_stc.h.

#define AO_UPDATE_Source_Select

(

x

)

(((x)&0x1f)<<11)

Definition at line 255 of file ni_stc.h.

#define AO_UPDATE_St   _bit5

Definition at line 118 of file ni_stc.h.

#define AO_Window_Address_611x   0x18

Definition at line 787 of file ni_stc.h.

#define AO_Window_Data_611x   0x1e

Definition at line 788 of file ni_stc.h.

#define boardtype   (*(ni_board *)dev->board_ptr)

Definition at line 1408 of file ni_stc.h.

#define Cal_Gain_Select_611x   0x05

Definition at line 785 of file ni_stc.h.

#define Calibration_Channel_2v5_Gnd   0x02

Definition at line 814 of file ni_stc.h.

#define Calibration_Channel_2v5_Pwm   0x0a

Definition at line 816 of file ni_stc.h.

#define Calibration_Channel_6143   0x42

Definition at line 803 of file ni_stc.h.

#define Calibration_Channel_6143_RelayOff   0x4000

Definition at line 812 of file ni_stc.h.

#define Calibration_Channel_6143_RelayOn   0x8000

Definition at line 811 of file ni_stc.h.

#define Calibration_Channel_Gnd_Gnd   0x00

Definition at line 813 of file ni_stc.h.

#define Calibration_Channel_Gnd_Pwm   0x0e

Definition at line 818 of file ni_stc.h.

#define Calibration_Channel_Pwm_Gnd   0x05

Definition at line 815 of file ni_stc.h.

#define Calibration_Channel_Pwm_Pwm   0x0d

Definition at line 817 of file ni_stc.h.

#define Calibration_Channel_Select_611x   0x1a

Definition at line 781 of file ni_stc.h.

#define Calibration_HighTime_6143   0x22

Definition at line 805 of file ni_stc.h.

#define Calibration_LowTime_6143   0x20

Definition at line 804 of file ni_stc.h.

#define Channel_A_Mode   0x03

Definition at line 711 of file ni_stc.h.

#define Channel_B_Mode   0x05

Definition at line 712 of file ni_stc.h.

#define Channel_C_Mode   0x07

Definition at line 713 of file ni_stc.h.

#define Clock_and_FOUT_Register   56

Definition at line 303 of file ni_stc.h.

#define Configuration   0x1f

Definition at line 709 of file ni_stc.h.

#define Configuration_Memory_Clear   82

Definition at line 692 of file ni_stc.h.

#define Configuration_Memory_High   0x12

Definition at line 753 of file ni_stc.h.

#define Configuration_Memory_Low   0x10

Definition at line 748 of file ni_stc.h.

#define DAC0_Direct_Data   0x18

Definition at line 775 of file ni_stc.h.

#define DAC1_Direct_Data   0x1a

Definition at line 776 of file ni_stc.h.

#define DAC_FIFO_Clear   84

Definition at line 694 of file ni_stc.h.

#define DAC_FIFO_Data   0x1e

Definition at line 774 of file ni_stc.h.

#define DAC_FIFO_Data_611x   0x14

Definition at line 784 of file ni_stc.h.

#define DIO_Control_Register   11

Definition at line 203 of file ni_stc.h.

#define DIO_HW_Serial_Enable   _bit9

Definition at line 206 of file ni_stc.h.

#define DIO_HW_Serial_Start   _bit8

Definition at line 207 of file ni_stc.h.

#define DIO_HW_Serial_Timebase   _bit10

Definition at line 205 of file ni_stc.h.

#define DIO_Output_Register   10

Definition at line 195 of file ni_stc.h.

#define DIO_Parallel_Data_Mask   0xff

Definition at line 197 of file ni_stc.h.

#define DIO_Parallel_Data_Out

(

a

)

((a)&0xff)

Definition at line 196 of file ni_stc.h.

#define DIO_Parallel_Input_Register   7

Definition at line 158 of file ni_stc.h.

#define DIO_Pins_Dir

(

a

)

((a)&0xff)

Definition at line 208 of file ni_stc.h.

#define DIO_Pins_Dir_Mask   0xff

Definition at line 209 of file ni_stc.h.

#define DIO_SDIN   _bit4

Definition at line 199 of file ni_stc.h.

#define DIO_SDOUT   _bit0

Definition at line 198 of file ni_stc.h.

#define DIO_Serial_Data_Mask   0xff00

Definition at line 201 of file ni_stc.h.

#define DIO_Serial_Data_Out

(

a

)

(((a)&0xff)<<8)

Definition at line 200 of file ni_stc.h.

#define DIO_Serial_Input_Register   28

Definition at line 248 of file ni_stc.h.

#define DIO_Serial_IO_In_Progress_St   _bit12

Definition at line 246 of file ni_stc.h.

#define DIO_Software_Serial_Control   _bit11

Definition at line 204 of file ni_stc.h.

#define EOC_Set_6143   0x1D

Definition at line 794 of file ni_stc.h.

#define G0_Armed_St   _bit8

Definition at line 664 of file ni_stc.h.

#define G0_Counting_St   _bit2

Definition at line 670 of file ni_stc.h.

#define G0_G1_Select   0x0b

Definition at line 721 of file ni_stc.h.

#define G0_Gate_Error_Confirm   _bit5

Definition at line 66 of file ni_stc.h.

#define G0_Gate_Error_St   _bit14

Definition at line 658 of file ni_stc.h.

#define G0_Gate_Interrupt_Ack   _bit15

Definition at line 56 of file ni_stc.h.

#define G0_Gate_Interrupt_Enable   _bit8

Definition at line 443 of file ni_stc.h.

#define G0_Gate_Interrupt_St   0x0004

Definition at line 82 of file ni_stc.h.

#define G0_Next_Load_Source_St   _bit4

Definition at line 668 of file ni_stc.h.

#define G0_No_Load_Between_Gates_St   _bit10

Definition at line 662 of file ni_stc.h.

#define G0_Reset   _bit2

Definition at line 437 of file ni_stc.h.

#define G0_Save_St   _bit0

Definition at line 672 of file ni_stc.h.

#define G0_Stale_Data_St   _bit6

Definition at line 666 of file ni_stc.h.

#define G0_TC_Error_Confirm   _bit6

Definition at line 65 of file ni_stc.h.

#define G0_TC_Error_St   _bit12

Definition at line 660 of file ni_stc.h.

#define G0_TC_Interrupt_Ack   _bit14

Definition at line 57 of file ni_stc.h.

#define G0_TC_Interrupt_Enable   _bit6

Definition at line 445 of file ni_stc.h.

#define G0_TC_St   0x0008

Definition at line 81 of file ni_stc.h.

#define G0G1_DMA_Select_6143   0x0B

Definition at line 792 of file ni_stc.h.

#define G1_Armed_St   _bit9

Definition at line 663 of file ni_stc.h.

#define G1_Counting_St   _bit3

Definition at line 669 of file ni_stc.h.

#define G1_Gate_Error_St   _bit15

Definition at line 657 of file ni_stc.h.

#define G1_Gate_Interrupt_Enable   _bit10

Definition at line 455 of file ni_stc.h.

#define G1_Gate_Interrupt_St   _bit2

Definition at line 121 of file ni_stc.h.

#define G1_Next_Load_Source_St   _bit5

Definition at line 667 of file ni_stc.h.

#define G1_No_Load_Between_Gates_St   _bit11

Definition at line 661 of file ni_stc.h.

#define G1_Reset   _bit3

Definition at line 436 of file ni_stc.h.

#define G1_Save_St   _bit1

Definition at line 671 of file ni_stc.h.

#define G1_Stale_Data_St   _bit7

Definition at line 665 of file ni_stc.h.

#define G1_TC_Error_St   _bit13

Definition at line 659 of file ni_stc.h.

#define G1_TC_Interrupt_Enable   _bit9

Definition at line 456 of file ni_stc.h.

#define G1_TC_St   _bit3

Definition at line 120 of file ni_stc.h.

#define G_Analog_Trigger_Reset   _bit3

Definition at line 619 of file ni_stc.h.

#define G_Arm   _bit0

Definition at line 621 of file ni_stc.h.

#define G_Arm_Copy   _bit13

Definition at line 612 of file ni_stc.h.

#define G_Autoincrement

(

a

)

((a)<<0)

Definition at line 675 of file ni_stc.h.

#define G_Autoincrement_Register

(

a

)

(68+(a))

Definition at line 590 of file ni_stc.h.

#define G_Bank_Switch_Enable   _bit12

Definition at line 624 of file ni_stc.h.

#define G_Bank_Switch_Mode   _bit11

Definition at line 625 of file ni_stc.h.

#define G_Bank_Switch_Start   _bit10

Definition at line 613 of file ni_stc.h.

#define G_Command_Register

(

a

)

(6+(a))

Definition at line 591 of file ni_stc.h.

#define G_Counting_Once

(

a

)

(((a)&0x03)<<10)

Definition at line 652 of file ni_stc.h.

#define G_Disarm   _bit4

Definition at line 618 of file ni_stc.h.

#define G_Disarm_Copy   _bit15

Definition at line 610 of file ni_stc.h.

#define G_Gate_On_Both_Edges   _bit2

Definition at line 654 of file ni_stc.h.

#define G_Gate_Polarity   _bit13

Definition at line 650 of file ni_stc.h.

#define G_Gate_Select

(

a

)

(((a)&0x1f)<<7)

Definition at line 629 of file ni_stc.h.

#define G_Gate_Select_Load_Source   _bit12

Definition at line 638 of file ni_stc.h.

#define G_Gating_Mode

(

a

)

(((a)&0x03)<<0)

Definition at line 644 of file ni_stc.h.

#define G_HW_Save_Register

(

a

)

(8+(a)*2)

Definition at line 592 of file ni_stc.h.

#define G_HW_Save_Register_High

(

a

)

(8+(a)*2)

Definition at line 593 of file ni_stc.h.

#define G_HW_Save_Register_Low

(

a

)

(9+(a)*2)

Definition at line 594 of file ni_stc.h.

#define G_Input_Select_Register

(

a

)

(36+(a))

Definition at line 595 of file ni_stc.h.

#define G_Little_Big_Endian   _bit9

Definition at line 614 of file ni_stc.h.

#define G_Load   _bit2

Definition at line 626 of file ni_stc.h.

#define G_Load_A_Register

(

a

)

(28+(a)*4)

Definition at line 596 of file ni_stc.h.

#define G_Load_A_Register_High

(

a

)

(28+(a)*4)

Definition at line 597 of file ni_stc.h.

#define G_Load_A_Register_Low

(

a

)

(29+(a)*4)

Definition at line 598 of file ni_stc.h.

#define G_Load_B_Register

(

a

)

(30+(a)*4)

Definition at line 599 of file ni_stc.h.

#define G_Load_B_Register_High

(

a

)

(30+(a)*4)

Definition at line 600 of file ni_stc.h.

#define G_Load_B_Register_Low

(

a

)

(31+(a)*4)

Definition at line 601 of file ni_stc.h.

#define G_Load_Source_Select   _bit7

Definition at line 647 of file ni_stc.h.

#define G_Loading_On_Gate   _bit14

Definition at line 649 of file ni_stc.h.

#define G_Loading_On_TC   _bit12

Definition at line 641 of file ni_stc.h.

#define G_Mode_Register

(

a

)

(26+(a))

Definition at line 602 of file ni_stc.h.

#define G_OR_Gate   _bit13

Definition at line 637 of file ni_stc.h.

#define G_Output_Mode

(

a

)

(((a)&0x03)<<8)

Definition at line 642 of file ni_stc.h.

#define G_Output_Polarity   _bit14

Definition at line 636 of file ni_stc.h.

#define G_Read_Acknowledges_Irq   _bit0

Definition at line 632 of file ni_stc.h.

#define G_Reload_Source_Switching   _bit15

Definition at line 648 of file ni_stc.h.

#define G_Save_Register

(

a

)

(12+(a)*2)

Definition at line 603 of file ni_stc.h.

#define G_Save_Register_High

(

a

)

(12+(a)*2)

Definition at line 604 of file ni_stc.h.

#define G_Save_Register_Low

(

a

)

(13+(a)*2)

Definition at line 605 of file ni_stc.h.

#define G_Save_Trace   _bit1

Definition at line 620 of file ni_stc.h.

#define G_Save_Trace_Copy   _bit14

Definition at line 611 of file ni_stc.h.

#define G_Source_Polarity   _bit15

Definition at line 635 of file ni_stc.h.

#define G_Source_Select

(

a

)

(((a)&0x1f)<<2)

Definition at line 630 of file ni_stc.h.

#define G_Status_Register   4

Definition at line 606 of file ni_stc.h.

#define G_Stop_Mode

(

a

)

(((a)&0x03)<<5)

Definition at line 653 of file ni_stc.h.

#define G_Synchronized_Gate   _bit8

Definition at line 615 of file ni_stc.h.

#define G_Trigger_Mode_For_Edge_Gate

(

a

)

(((a)&0x03)<<3)

Definition at line 643 of file ni_stc.h.

#define G_Up_Down

(

a

)

(((a)&0x03)<<5)

Definition at line 617 of file ni_stc.h.

#define G_Write_Acknowledges_Irq   _bit1

Definition at line 631 of file ni_stc.h.

#define G_Write_Switch   _bit7

Definition at line 616 of file ni_stc.h.

#define GPFO_0_Output_Enable   _bit14

Definition at line 683 of file ni_stc.h.

#define GPFO_0_Output_Select

(

a

)

((a)<<11)

Definition at line 682 of file ni_stc.h.

#define GPFO_1_Output_Enable   _bit15

Definition at line 684 of file ni_stc.h.

#define GPFO_1_Output_Select   _bit7

Definition at line 681 of file ni_stc.h.

#define Interrupt_A_Ack_Register   2

Definition at line 55 of file ni_stc.h.

#define Interrupt_A_Enable   _bit11

Definition at line 352 of file ni_stc.h.

#define Interrupt_A_Enable_Register   73

Definition at line 441 of file ni_stc.h.

#define Interrupt_A_Output_Select

(

x

)

((x)<<8)

Definition at line 353 of file ni_stc.h.

#define Interrupt_A_St   0x8000

Definition at line 69 of file ni_stc.h.

#define Interrupt_B_Ack_Register   3

Definition at line 88 of file ni_stc.h.

#define Interrupt_B_Enable   _bit15

Definition at line 350 of file ni_stc.h.

#define Interrupt_B_Enable_Register   75

Definition at line 453 of file ni_stc.h.

#define Interrupt_B_Output_Select

(

x

)

((x)<<12)

Definition at line 351 of file ni_stc.h.

#define Interrupt_B_St   _bit15

Definition at line 108 of file ni_stc.h.

#define Interrupt_Control_Register   59

Definition at line 349 of file ni_stc.h.

#define Interrupt_Output_On_3_Pins   _bit1

Definition at line 356 of file ni_stc.h.

#define Interrupt_Output_Polarity   _bit0

Definition at line 357 of file ni_stc.h.

#define IO_Bidirection_Pin_Register   57

Definition at line 324 of file ni_stc.h.

#define Joint_Reset_Register   72

Definition at line 430 of file ni_stc.h.

#define Joint_Status_1_Register   27

Definition at line 245 of file ni_stc.h.

#define Joint_Status_2_Register   29

Definition at line 249 of file ni_stc.h.

#define M_SERIES_EEPROM_SIZE   1024

Definition at line 1375 of file ni_stc.h.

#define Magic_611x   0x19

Definition at line 780 of file ni_stc.h.

#define Magic_6143   0x19

Definition at line 791 of file ni_stc.h.

#define MAX_N_AO_CHAN   8

Definition at line 1410 of file ni_stc.h.

#define Misc_Command   0x0f

Definition at line 705 of file ni_stc.h.

#define n_ni_boards   (sizeof(ni_boards)/sizeof(ni_board))

Definition at line 1406 of file ni_stc.h.

#define NI_PRIVATE_COMMON

Definition at line 1413 of file ni_stc.h.

#define NUM_GPCT   2

Definition at line 1411 of file ni_stc.h.

#define NUM_PFI_OUTPUT_SELECT_REGS   6

Definition at line 51 of file ni_stc.h.

#define Pass_Thru_0_Interrupt_Enable   _bit9

Definition at line 442 of file ni_stc.h.

#define Pass_Thru_0_Interrupt_Polarity   _bit3

Definition at line 354 of file ni_stc.h.

#define Pass_Thru_0_Interrupt_St   0x0001

Definition at line 84 of file ni_stc.h.

#define Pass_Thru_1_Interrupt_Enable   _bit11

Definition at line 454 of file ni_stc.h.

#define Pass_Thru_1_Interrupt_Polarity   _bit2

Definition at line 355 of file ni_stc.h.

#define Pass_Thru_1_Interrupt_St   _bit0

Definition at line 123 of file ni_stc.h.

#define PipelineDelay_6143   0x1f

Definition at line 793 of file ni_stc.h.

#define Port_A   0x19

Definition at line 706 of file ni_stc.h.

#define Port_B   0x1b

Definition at line 707 of file ni_stc.h.

#define Port_C   0x1d

Definition at line 708 of file ni_stc.h.

#define Relay_Counter_Load_Val__6143   0x4C

Definition at line 806 of file ni_stc.h.

#define Release_Date_6143   0x54

Definition at line 808 of file ni_stc.h.

#define Release_Oldest_Date_6143   0x58

Definition at line 809 of file ni_stc.h.

#define RTSI_Board_Register   81

Definition at line 549 of file ni_stc.h.

#define RTSI_Trig_A_Output_Register   79

Definition at line 527 of file ni_stc.h.

#define RTSI_Trig_B_Output_Register   80

Definition at line 528 of file ni_stc.h.

#define RTSI_Trig_Direction_Register   58

Definition at line 325 of file ni_stc.h.

#define Second_IRQ_A_Enable_Register   74

Definition at line 467 of file ni_stc.h.

#define Second_IRQ_B_Enable_Register   76

Definition at line 481 of file ni_stc.h.

#define SerDacLd

(

x

)

(0x08<<(x))

Definition at line 893 of file ni_stc.h.

#define Serial_Command   0x0d

Definition at line 704 of file ni_stc.h.

#define Signature_6143   0x50

Definition at line 807 of file ni_stc.h.

#define Software_Reset   _bit11

Definition at line 431 of file ni_stc.h.

#define Strobes   0x01

Definition at line 710 of file ni_stc.h.

#define Window_Address   0x00

Definition at line 689 of file ni_stc.h.

#define Window_Data   0x02

Definition at line 690 of file ni_stc.h.

#define Write_Strobe_0_Register   82

Definition at line 550 of file ni_stc.h.

#define Write_Strobe_1_Register   83

Definition at line 551 of file ni_stc.h.

#define Write_Strobe_2_Register   84

Definition at line 552 of file ni_stc.h.

#define Write_Strobe_3_Register   85

Definition at line 553 of file ni_stc.h.

#define XXX_Status   0x01

Definition at line 699 of file ni_stc.h.

---

Typedef Documentation

typedef struct ni_board_struct ni_board

---

Enumeration Type Documentation

anonymous enum

Enumerator:

ai_gain_16
ai_gain_8
ai_gain_14
ai_gain_4
ai_gain_611x
ai_gain_622x
ai_gain_628x
ai_gain_6143

Definition at line 900 of file ni_stc.h.

enum AI_AO_Select_Bits

Enumerator:

AI_DMA_Select_Shift
AI_DMA_Select_Mask
AO_DMA_Select_Shift
AO_DMA_Select_Mask

Definition at line 715 of file ni_stc.h.

enum ai_convert_output_selection

Enumerator:

AI_CONVERT_Output_High_Z
AI_CONVERT_Output_Ground
AI_CONVERT_Output_Enable_Low
AI_CONVERT_Output_Enable_High

Definition at line 365 of file ni_stc.h.

enum AO_FIFO_Mode_Bits

Enumerator:

AO_FIFO_Mode_HF_to_F
AO_FIFO_Mode_F
AO_FIFO_Mode_HF
AO_FIFO_Mode_E

Definition at line 266 of file ni_stc.h.

enum AO_Misc_611x_Bits

Enumerator:

CLEAR_WG

Definition at line 842 of file ni_stc.h.

enum AO_Personal_Bits

Enumerator:

AO_Interval_Buffer_Mode
AO_BC_Source_Select
AO_UPDATE_Pulse_Width
AO_UPDATE_Pulse_Timebase
AO_UPDATE_Original_Pulse
AO_DMA_PIO_Control
AO_AOFREQ_Polarity
AO_FIFO_Enable
AO_FIFO_Flags_Polarity
AO_TMRDACWR_Pulse_Width
AO_Fast_CPU
AO_Number_Of_DAC_Packages
AO_Multiple_DACS_Per_Package

Definition at line 512 of file ni_stc.h.

enum ao_update_output_selection

Enumerator:

AO_Update_Output_High_Z
AO_Update_Output_Ground
AO_Update_Output_Enable_Low
AO_Update_Output_Enable_High

Definition at line 562 of file ni_stc.h.

enum caldac_enum

Enumerator:

caldac_none
mb88341
dac8800
dac8043
ad8522
ad8804
ad8842
ad8804_debug

Definition at line 903 of file ni_stc.h.

enum CDI_Mode_Bits

Enumerator:

CDI_Sample_Source_Select_Mask
CDI_Halt_On_Error_Bit
CDI_Polarity_Bit
CDI_FIFO_Mode_Bit
CDI_Data_Lane_Mask
CDI_Data_Lane_0_15_Bits
CDI_Data_Lane_16_31_Bits
CDI_Data_Lane_0_7_Bits
CDI_Data_Lane_8_15_Bits
CDI_Data_Lane_16_23_Bits
CDI_Data_Lane_24_31_Bits

Definition at line 1338 of file ni_stc.h.

enum CDIO_Command_Bits

Enumerator:

CDO_Disarm_Bit
CDO_Arm_Bit
CDI_Disarm_Bit
CDI_Arm_Bit
CDO_Reset_Bit
CDI_Reset_Bit
CDO_Error_Interrupt_Enable_Set_Bit
CDO_Error_Interrupt_Enable_Clear_Bit
CDI_Error_Interrupt_Enable_Set_Bit
CDI_Error_Interrupt_Enable_Clear_Bit
CDO_FIFO_Request_Interrupt_Enable_Set_Bit
CDO_FIFO_Request_Interrupt_Enable_Clear_Bit
CDI_FIFO_Request_Interrupt_Enable_Set_Bit
CDI_FIFO_Request_Interrupt_Enable_Clear_Bit
CDO_Error_Interrupt_Confirm_Bit
CDI_Error_Interrupt_Confirm_Bit
CDO_Empty_FIFO_Interrupt_Enable_Set_Bit
CDO_Empty_FIFO_Interrupt_Enable_Clear_Bit
CDO_SW_Update_Bit
CDI_SW_Update_Bit

Definition at line 1315 of file ni_stc.h.

enum CDIO_DMA_Select_Bits

Enumerator:

CDI_DMA_Select_Shift
CDI_DMA_Select_Mask
CDO_DMA_Select_Shift
CDO_DMA_Select_Mask

Definition at line 1295 of file ni_stc.h.

enum CDIO_Status_Bits

Enumerator:

CDO_FIFO_Empty_Bit
CDO_FIFO_Full_Bit
CDO_FIFO_Request_Bit
CDO_Overrun_Bit
CDO_Underflow_Bit
CDI_FIFO_Empty_Bit
CDI_FIFO_Full_Bit
CDI_FIFO_Request_Bit
CDI_Overrun_Bit
CDI_Overflow_Bit

Definition at line 1302 of file ni_stc.h.

enum CDO_Mode_Bits

Enumerator:

CDO_Sample_Source_Select_Mask
CDO_Retransmit_Bit
CDO_Halt_On_Error_Bit
CDO_Polarity_Bit
CDO_FIFO_Mode_Bit
CDO_Data_Lane_Mask
CDO_Data_Lane_0_15_Bits
CDO_Data_Lane_16_31_Bits
CDO_Data_Lane_0_7_Bits
CDO_Data_Lane_8_15_Bits
CDO_Data_Lane_16_23_Bits
CDO_Data_Lane_24_31_Bits

Definition at line 1352 of file ni_stc.h.

enum Clock_and_FOUT_bits

Enumerator:

FOUT_Enable
FOUT_Timebase_Select
DIO_Serial_Out_Divide_By_2
Slow_Internal_Time_Divide_By_2
Slow_Internal_Timebase
G_Source_Divide_By_2
Clock_To_Board_Divide_By_2
Clock_To_Board
AI_Output_Divide_By_2
AI_Source_Divide_By_2
AO_Output_Divide_By_2
AO_Source_Divide_By_2
FOUT_Divider_mask

Definition at line 304 of file ni_stc.h.

enum Configuration_Memory_High_Bits

Enumerator:

AI_AC_COUPLE
AI_DIFFERENTIAL
AI_COMMON
AI_GROUND

Definition at line 754 of file ni_stc.h.

enum Configuration_Memory_Low_Bits

Enumerator:

AI_DITHER
AI_LAST_CHANNEL

Definition at line 749 of file ni_stc.h.

enum cs5529_command_bits

Enumerator:

CSCMD_POWER_SAVE
CSCMD_REGISTER_SELECT_MASK
CSCMD_OFFSET_REGISTER
CSCMD_GAIN_REGISTER
CSCMD_CONFIG_REGISTER
CSCMD_READ
CSCMD_CONTINUOUS_CONVERSIONS
CSCMD_SINGLE_CONVERSION
CSCMD_COMMAND

Definition at line 877 of file ni_stc.h.

enum cs5529_configuration_bits

Enumerator:

CSCFG_CAL_CONTROL_MASK
CSCFG_SELF_CAL_OFFSET
CSCFG_SELF_CAL_GAIN
CSCFG_SELF_CAL_OFFSET_GAIN
CSCFG_SYSTEM_CAL_OFFSET
CSCFG_SYSTEM_CAL_GAIN
CSCFG_DONE
CSCFG_POWER_SAVE_SELECT
CSCFG_PORT_MODE
CSCFG_RESET_VALID
CSCFG_RESET
CSCFG_UNIPOLAR
CSCFG_WORD_RATE_2180_CYCLES
CSCFG_WORD_RATE_1092_CYCLES
CSCFG_WORD_RATE_532_CYCLES
CSCFG_WORD_RATE_388_CYCLES
CSCFG_WORD_RATE_324_CYCLES
CSCFG_WORD_RATE_17444_CYCLES
CSCFG_WORD_RATE_8724_CYCLES
CSCFG_WORD_RATE_4364_CYCLES
CSCFG_WORD_RATE_MASK
CSCFG_LOW_POWER

Definition at line 845 of file ni_stc.h.

enum cs5529_status_bits

Enumerator:

CSS_ADC_BUSY
CSS_OSC_DETECT
CSS_OVERRANGE

Definition at line 888 of file ni_stc.h.

enum Interrupt_B_Ack_Bits

Enumerator:

G1_Gate_Error_Confirm
G1_TC_Error_Confirm
AO_BC_TC_Trigger_Error_Confirm
AO_BC_TC_Error_Confirm
AO_UI2_TC_Error_Confrim
AO_UI2_TC_Interrupt_Ack
AO_UC_TC_Interrupt_Ack
AO_BC_TC_Interrupt_Ack
AO_START1_Interrupt_Ack
AO_UPDATE_Interrupt_Ack
AO_START_Interrupt_Ack
AO_STOP_Interrupt_Ack
AO_Error_Interrupt_Ack
G1_TC_Interrupt_Ack
G1_Gate_Interrupt_Ack

Definition at line 89 of file ni_stc.h.

enum Interrupt_C_Enable_Bits

Enumerator:

Interrupt_Group_C_Enable_Bit

Definition at line 1367 of file ni_stc.h.

enum Interrupt_C_Status_Bits

Enumerator:

Interrupt_Group_C_Status_Bit

Definition at line 1371 of file ni_stc.h.

enum Joint_Status_2_Bits

Enumerator:

AO_TMRDACWRs_In_Progress_St

Definition at line 250 of file ni_stc.h.

enum m_series_register_offsets

Enumerator:

M_Offset_CDIO_DMA_Select
M_Offset_SCXI_Status
M_Offset_AI_AO_Select
M_Offset_SCXI_Serial_Data_In
M_Offset_G0_G1_Select
M_Offset_Misc_Command
M_Offset_SCXI_Serial_Data_Out
M_Offset_SCXI_Control
M_Offset_SCXI_Output_Enable
M_Offset_AI_FIFO_Data
M_Offset_Static_Digital_Output
M_Offset_Static_Digital_Input
M_Offset_DIO_Direction
M_Offset_Cal_PWM
M_Offset_AI_Config_FIFO_Data
M_Offset_Interrupt_C_Enable
M_Offset_Interrupt_C_Status
M_Offset_Analog_Trigger_Control
M_Offset_AO_Serial_Interrupt_Enable
M_Offset_AO_Serial_Interrupt_Ack
M_Offset_AO_Serial_Interrupt_Status
M_Offset_AO_Calibration
M_Offset_AO_FIFO_Data
M_Offset_PFI_Filter
M_Offset_RTSI_Filter
M_Offset_SCXI_Legacy_Compatibility
M_Offset_Interrupt_A_Ack
M_Offset_AI_Status_1
M_Offset_Interrupt_B_Ack
M_Offset_AO_Status_1
M_Offset_AI_Command_2
M_Offset_G01_Status
M_Offset_AO_Command_2
M_Offset_AO_Status_2
M_Offset_G0_Command
M_Offset_G1_Command
M_Offset_G0_HW_Save
M_Offset_G0_HW_Save_High
M_Offset_AI_Command_1
M_Offset_G0_HW_Save_Low
M_Offset_AO_Command_1
M_Offset_G1_HW_Save
M_Offset_G1_HW_Save_High
M_Offset_G1_HW_Save_Low
M_Offset_AI_Mode_1
M_Offset_G0_Save
M_Offset_G0_Save_High
M_Offset_AI_Mode_2
M_Offset_G0_Save_Low
M_Offset_AI_SI_Load_A
M_Offset_G1_Save
M_Offset_G1_Save_High
M_Offset_G1_Save_Low
M_Offset_AI_SI_Load_B
M_Offset_AO_UI_Save
M_Offset_AI_SC_Load_A
M_Offset_AO_BC_Save
M_Offset_AI_SC_Load_B
M_Offset_AO_UC_Save
M_Offset_AI_SI2_Load_A
M_Offset_AI_SI2_Load_B
M_Offset_G0_Mode
M_Offset_G1_Mode
M_Offset_Joint_Status_1
M_Offset_G0_Load_A
M_Offset_Joint_Status_2
M_Offset_G0_Load_B
M_Offset_G1_Load_A
M_Offset_G1_Load_B
M_Offset_G0_Input_Select
M_Offset_G1_Input_Select
M_Offset_AO_Mode_1
M_Offset_AO_Mode_2
M_Offset_AO_UI_Load_A
M_Offset_AO_UI_Load_B
M_Offset_AO_BC_Load_A
M_Offset_AO_BC_Load_B
M_Offset_AO_UC_Load_A
M_Offset_AO_UC_Load_B
M_Offset_Clock_and_FOUT
M_Offset_IO_Bidirection_Pin
M_Offset_RTSI_Trig_Direction
M_Offset_Interrupt_Control
M_Offset_AI_Output_Control
M_Offset_Analog_Trigger_Etc
M_Offset_AI_START_STOP_Select
M_Offset_AI_Trigger_Select
M_Offset_AI_SI_Save
M_Offset_AI_DIV_Load_A
M_Offset_AI_SC_Save
M_Offset_AO_Start_Select
M_Offset_AO_Trigger_Select
M_Offset_AO_Mode_3
M_Offset_G0_Autoincrement
M_Offset_G1_Autoincrement
M_Offset_Joint_Reset
M_Offset_Interrupt_A_Enable
M_Offset_Interrupt_B_Enable
M_Offset_AI_Personal
M_Offset_AO_Personal
M_Offset_RTSI_Trig_A_Output
M_Offset_RTSI_Trig_B_Output
M_Offset_RTSI_Shared_MUX
M_Offset_AO_Output_Control
M_Offset_AI_Mode_3
M_Offset_Configuration_Memory_Clear
M_Offset_AI_FIFO_Clear
M_Offset_AO_FIFO_Clear
M_Offset_G0_Counting_Mode
M_Offset_G1_Counting_Mode
M_Offset_G0_Second_Gate
M_Offset_G1_Second_Gate
M_Offset_G0_DMA_Config
M_Offset_G0_DMA_Status
M_Offset_G1_DMA_Config
M_Offset_G1_DMA_Status
M_Offset_G0_MSeries_ABZ
M_Offset_G1_MSeries_ABZ
M_Offset_Clock_and_Fout2
M_Offset_PLL_Control
M_Offset_PLL_Status
M_Offset_PFI_Output_Select_1
M_Offset_PFI_Output_Select_2
M_Offset_PFI_Output_Select_3
M_Offset_PFI_Output_Select_4
M_Offset_PFI_Output_Select_5
M_Offset_PFI_Output_Select_6
M_Offset_PFI_DI
M_Offset_PFI_DO
M_Offset_AI_Config_FIFO_Bypass
M_Offset_SCXI_DIO_Enable
M_Offset_CDI_FIFO_Data
M_Offset_CDO_FIFO_Data
M_Offset_CDIO_Status
M_Offset_CDIO_Command
M_Offset_CDI_Mode
M_Offset_CDO_Mode
M_Offset_CDI_Mask_Enable
M_Offset_CDO_Mask_Enable

Definition at line 922 of file ni_stc.h.

enum MSeries_AI_Config_FIFO_Bypass_Bits

Enumerator:

MSeries_AI_Bypass_Channel_Mask
MSeries_AI_Bypass_Bank_Mask
MSeries_AI_Bypass_Cal_Sel_Pos_Mask
MSeries_AI_Bypass_Cal_Sel_Neg_Mask
MSeries_AI_Bypass_Mode_Mux_Mask
MSeries_AO_Bypass_AO_Cal_Sel_Mask
MSeries_AI_Bypass_Gain_Mask
MSeries_AI_Bypass_Dither_Bit
MSeries_AI_Bypass_Polarity_Bit
MSeries_AI_Bypass_Config_FIFO_Bit

Definition at line 1207 of file ni_stc.h.

enum MSeries_AI_Config_FIFO_Data_Bits

Enumerator:

MSeries_AI_Config_Channel_Type_Mask
MSeries_AI_Config_Channel_Type_Calibration_Bits
MSeries_AI_Config_Channel_Type_Differential_Bits
MSeries_AI_Config_Channel_Type_Common_Ref_Bits
MSeries_AI_Config_Channel_Type_Ground_Ref_Bits
MSeries_AI_Config_Channel_Type_Aux_Bits
MSeries_AI_Config_Channel_Type_Ghost_Bits
MSeries_AI_Config_Polarity_Bit
MSeries_AI_Config_Dither_Bit
MSeries_AI_Config_Last_Channel_Bit

Definition at line 1117 of file ni_stc.h.

enum MSeries_AO_Config_Bank_Bits

Enumerator:

MSeries_AO_DAC_Offset_Select_Mask
MSeries_AO_DAC_Offset_0V_Bits
MSeries_AO_DAC_Offset_5V_Bits
MSeries_AO_DAC_Reference_Mask
MSeries_AO_DAC_Reference_10V_Internal_Bits
MSeries_AO_DAC_Reference_5V_Internal_Bits
MSeries_AO_Update_Timed_Bit
MSeries_AO_Bipolar_Bit

Definition at line 1234 of file ni_stc.h.

enum MSeries_AO_Reference_Attenuation_Bits

Enumerator:

MSeries_Attenuate_x5_Bit

Definition at line 1245 of file ni_stc.h.

enum MSeries_Clock_and_Fout2_Bits

Enumerator:

MSeries_PLL_In_Source_Select_RTSI0_Bits
MSeries_PLL_In_Source_Select_Star_Trigger_Bits
MSeries_PLL_In_Source_Select_RTSI7_Bits
MSeries_PLL_In_Source_Select_PXI_Clock10
MSeries_PLL_In_Source_Select_Mask
MSeries_Timebase1_Select_Bit
MSeries_Timebase3_Select_Bit
MSeries_RTSI_10MHz_Bit

Definition at line 1148 of file ni_stc.h.

enum MSeries_Gi_DMA_Config_Bits

Enumerator:

Gi_DMA_BankSW_Error_Bit
Gi_DMA_Reset_Bit
Gi_DMA_Int_Enable_Bit
Gi_DMA_Write_Bit
Gi_DMA_Enable_Bit

Definition at line 1276 of file ni_stc.h.

enum MSeries_PLL_Control_Bits

Enumerator:

MSeries_PLL_Enable_Bit
MSeries_PLL_VCO_Mode_200_325MHz_Bits
MSeries_PLL_VCO_Mode_175_225MHz_Bits
MSeries_PLL_VCO_Mode_100_225MHz_Bits
MSeries_PLL_VCO_Mode_75_150MHz_Bits

Definition at line 1175 of file ni_stc.h.

enum MSeries_PLL_Status

Enumerator:

MSeries_PLL_Locked_Bit

Definition at line 1203 of file ni_stc.h.

enum ni_reg_type

Enumerator:

ni_reg_normal
ni_reg_611x
ni_reg_6711
ni_reg_6713
ni_reg_67xx_mask
ni_reg_6xxx_mask
ni_reg_622x
ni_reg_625x
ni_reg_628x
ni_reg_m_series_mask
ni_reg_6143

Definition at line 906 of file ni_stc.h.

enum RTSI_Trig_B_Output_Bits

Enumerator:

RTSI_Sub_Selection_1_Bit

Definition at line 529 of file ni_stc.h.

enum RTSI_Trig_Direction_Bits

Enumerator:

Drive_RTSI_Clock_Bit
Use_RTSI_Clock_Bit

Definition at line 326 of file ni_stc.h.

enum Second_IRQ_A_Enable_Bits

Enumerator:

AI_SC_TC_Second_Irq_Enable
AI_START1_Second_Irq_Enable
AI_START2_Second_Irq_Enable
AI_START_Second_Irq_Enable
AI_STOP_Second_Irq_Enable
AI_Error_Second_Irq_Enable
G0_TC_Second_Irq_Enable
AI_FIFO_Second_Irq_Enable
G0_Gate_Second_Irq_Enable
Pass_Thru_0_Second_Irq_Enable

Definition at line 468 of file ni_stc.h.

enum Second_IRQ_B_Enable_Bits

Enumerator:

AO_BC_TC_Second_Irq_Enable
AO_START1_Second_Irq_Enable
AO_UPDATE_Second_Irq_Enable
AO_START_Second_Irq_Enable
AO_STOP_Second_Irq_Enable
AO_Error_Second_Irq_Enable
AO_UC_TC_Second_Irq_Enable
AO_UI2_TC_Second_Irq_Enable
AO_FIFO_Second_Irq_Enable
G1_TC_Second_Irq_Enable
G1_Gate_Second_Irq_Enable
Pass_Thru_1_Second_Irq_Enable

Definition at line 482 of file ni_stc.h.

enum windowed_regs_67xx_61xx

Enumerator:

AO_Immediate_671x
AO_Timed_611x
AO_FIFO_Offset_Load_611x
AO_Later_Single_Point_Updates
AO_Waveform_Generation_611x
AO_Misc_611x
AO_Calibration_Channel_Select_67xx
AO_Configuration_2_67xx
CAL_ADC_Command_67xx
CAL_ADC_Status_67xx
CAL_ADC_Data_67xx
CAL_ADC_Config_Data_High_Word_67xx
CAL_ADC_Config_Data_Low_Word_67xx

Definition at line 823 of file ni_stc.h.

enum XXX_Status_Bits

Enumerator:

PROMOUT
AI_FIFO_LOWER_NOT_EMPTY

Definition at line 700 of file ni_stc.h.